|10-30-2014 09:36 AM|
|Plantgirljeeper14||I have an 05 TJ. What could cause this problem? I have less 60 on her. Only had it off road twice. It's lifted 3"|
|10-29-2014 10:55 AM|
A proper steering does not need a steering damper all they do is hide issues.
|10-29-2014 09:25 AM|
|Plantgirljeeper14||Just had it lifted a week or so ago. Could that have been a contributing factor? At first I had the death wobble and we took car of that with long arms and steering stablelizer.|
|10-29-2014 01:31 AM|
|jokerchief462||If you worked on the brakes look at the dust shields for evidence of rubbing. You may have to remove the calipers and rotors.|
|10-28-2014 11:42 AM|
|Plantgirljeeper14||Anyone know ifthat was the problem for sure? I am having that same sound coming from my driver's side wheel.|
|06-18-2013 10:43 PM|
|jeeep_jeep.7||I'll check it out. I get my bike back tomorrow so I get to start working on the jeep this week. Ill let you guys know how it goes thanks!|
|06-18-2013 10:25 PM|
|viking4949||I concur, probably just the front axle u joints. I just did mine as well. Grab the u joint and wiggle it back and forth, if you hear the clicking, or there is much movement, replace.|
|06-17-2013 08:11 PM|
|Redrider94||Check the u joints in the front axle yokes|
|06-17-2013 07:10 PM|
Rattling sound coming from front driver wheel?!
Hey guys, new here. I've been having this rattling sound (kind of like a chatter) coming from my front left wheel. (at least that's where i think its coming from) Sounds the loudest there when i do slow drive bys. It only does it at slow speeds and goes away when i apply even the slightest amount of brakes. I thought it was something to do with the brakes of course so I took off all four wheels and checked all four brakes and everything looked fine and nothing seemed loose to cause rattling. The driver front tire also sounds like it has a nail or rock in the tread but I've checked, double checked, and triple checked the damn thing and it has nothing. This started after i got in a little accident and jumped a center median. I'm planning to start working on it in a few weeks after i get my bike fixed and running again and any directions on where to start would be great!