|06-21-2013 04:09 PM|
|music_man185||Haha. I may plug them back up in the future, but right now, I don't really have a need for the dome light. I just wanted to make sure my battery wouldn't be dead from having my doors off and not pulling the fuse|
|06-21-2013 11:15 AM|
|bryanintowson||Easy fix - replug and enjoy not bashing your head and knees when you get in and out at night!|
|06-20-2013 05:23 PM|
|06-20-2013 04:06 PM|
So the plugs are disconnected then?
|06-20-2013 02:04 PM|
|music_man185||The switches are still there. So is the wiring harness plug. I can feel them hanging behind the door panel|
|06-20-2013 01:27 PM|
You should also check to see if the door jamb switches are even in. My PO took them out and threw them away. I had to replace them. They look like these:
BWD Door Jamb Switch | Product Details | Pep Boys
If it's missing, you'll see a hole in the door jamb on the tub itself.
|06-20-2013 12:28 PM|
Buy clips for the outside of the door switches
Pull the fuse
Install a switch inline with the fuse (what I did)
|06-20-2013 12:16 PM|
|music_man185||I guess that's just as good as pulling the fuse isn't it?|
|06-20-2013 09:37 AM|
That's why you lights do not come on.
|06-20-2013 09:04 AM|
|music_man185||I finally got around to checking my fuse box. #4 is still there, so I felt behind the switch in the door jam, and they are both unhooked|
|06-16-2013 12:12 AM|
|Tyr4nt||I have a hard top & full steelies... I pulled the fuse at the beginning of the season and don't plan on putting it back in until the weather starts getting too cold.|
|06-15-2013 11:00 PM|
|04Xtj||oh..cool..didnt know that..thanks..i unhooked the door switch..ill plug it back in and yank the fuze..kill that chime..|
|06-15-2013 10:59 PM|
|BigCrave||The PO could have also wired in a toggle switch to bypass the door switch. I have one in mine and can still turn the headlight switch to turn on the overhead light.|
|06-15-2013 10:06 PM|
That's how it it works in my '04. I have been running without fuse #4 for years. I never put it back in because I like the way everything functions without it. Nice and quiet. I suspect the previous owner of your Jeep did too.
|06-15-2013 09:57 PM|
|Water Dog||Pulling the fuse will NOT effect the light switch on the dash. Fuse #4 is to enable/disable the door switch only. Simply pull fuse #4 if the doors are off, and put it back in when the doors are on and you will be golden. Check and see if the fuse that's in there is good.|
|06-15-2013 09:00 PM|
|music_man185||Where could I look to see if the button on the jam is unhooked? Just to make sure that's what they did|
|06-15-2013 08:39 PM|
|04Xtj||oh..and my doors stay off for days at a time..no problems with the switch un hooked and the fuze still in the box|
|06-15-2013 08:35 PM|
no..the fuze is not pulled...and you dont have to pull it...
the light still works from the dash switch because the fuze is in..it is fine..
the guy who owned it before you un hooked the door switches..that is why the dash switch still works..
open your door..there is a button sticking out on the jam..(front of jam above door strap)..that is what turns your light on when door is open..they unhooked that...it is fine and will work with dash switch..if you want it to work with doors in the winter...re connect it..very simple to do
its how i run mine..and the light will come on every time you turn the jeep off for about 30 seconds..
|06-15-2013 08:32 PM|
|music_man185||would i still be able to turn the light on with the switch if the fuse was pulled?|
|06-15-2013 08:10 PM|
|06-15-2013 08:08 PM|
|Water Dog||^^^^What he says. Congrats on the Jeep. 1999...good vintage|
|06-15-2013 07:14 PM|
It sounds like he fuse is already pulled. I would check the #4 fuse in the fuse panel behind the glove box. If its there, take it out. If it is not, you are good to go.
Congrats on the new jeep. I have a 99 sport and I live it.
|06-15-2013 07:05 PM|
Do I Need To Pull The Interior Light Fuse?
I just got my first jeep last night. It is a 99 sahara. My friend has an 06. When he takes his doors off, he says he has to pull his fuse to keep his interior light from staying on. When I took my doors off, my light never came on. If I rotate the dash light knob, the light will come on, but I can turn it off. Do I need to pull my fuse to make sure my battery isn't dead in the morning?