|06-21-2013 11:37 PM|
|OverkillYJ||Yeah they are simple. Just make them tight. If you strip them without a breaker bar or impact gun then you needed to replace the nutserts anyway.|
|06-21-2013 11:18 PM|
|tigerblood||If you have rust, just get them good and snug, don't want to strip or break loose those nutserts.|
|06-21-2013 10:51 PM|
I normally just hit it with an impact, a touch of medium Loctite.
Of course, Im from Cali, and we dont have rust issues here, so if you have rust issues Id go less, and probably use a lock washer instead of Loctite...
|06-21-2013 05:25 PM|
transfercase crossmember to frame bolt torque spec?
I'm looking for the transfer case crossmember to frame bolt torque spec. Its 6 bolts.