|06-23-2013 06:53 PM|
|petercass88||with 33's, 4.88's, huge axles, and custom drive shafts... im not too worries right now I will definitely keep the AX15 mod in mind if i ever go bigger! I do love the 4 banger though, its an awesome little motor|
|06-23-2013 06:45 PM|
|06-23-2013 06:36 PM|
|petercass88||how expensive would it be to pick up and convert over to an AX15?|
|06-23-2013 06:30 PM|
There is this thing called momentum. When you down shift it goes into your transmission. When you put larger tires on, they have more leverage on the differential gears. When you raise the gear ratio and have larger tires, the pinion gear may not turn as fast for every rotation of the tires, but it has a ton of torque being put into it from the tires. The gears being raised raise the power both ways, not just one. Lets see how those larger tires with their extra weight slow down without brakes. You know, like when you downshift. You think that dinky little AX5 is going to be "fine"? It will last a little bit, but there is no way in hell I would run a setup like that on something I dont want to break. If I downshifted in a setup like that where I live with some of the hills that trans would go pop. It would be fine to put around town with and only use offroad though.
Put an AX15 next to an AX5 and look at the size difference. Then remember that people being abusive can kill an AX15 with 35s over time. I killed a couple of AX5's with 31's and 410 gears before spending the cash to convert it to an AX15. I could have regeared for about the same cost, maybe even less, but I still would have had that turd between the motor and tires.
I could regear tomorrow and go stick 44's on if I wanted to, but there are proper ways to get there if that is where you want to be. It is far from the best way to push around a Jeep like that.
|06-23-2013 01:53 PM|
I am also glad your post had just as much wisdom in it as the other ones you made.
|06-23-2013 09:20 AM|
|Ibuildembig||I've got one good one and 3 bad ones in my shop. I get calls weekly for people looking for a good one. They are a far cry from a 15.|
|06-23-2013 09:16 AM|
The ax5 will be fine if you keep your gears in check. The transmission doesn't know it's driving 38" tires, it will feel like 28's to it with the right gears.
Considering the millions of people with 2.5L/Ax5 Jeeps that don't have issues, and also considering the handful or so of people here complaining about 'issues' with them, you can imply that there isn't really a major issue. Keep in mind this website reaches around the world, not just your area of town, so while you may find a hundred or so people have had some form of problem with the Ax5, you will find that hundreds of thousands of others have not had any issue. I never had issues with my Ax5, and its new owner still hasn't had any issues.
BTW, comparing the 22R engines to the 2.5L is like trying to compare Japanese vs American engineering. Japanese engineering is just infinitely better. That 22R is just a better built engine, even the carb'd version. Has a better torque range, and the aftermarket world has endless supplies of performance parts (I've seen a hotrod 22RE pushing almost 400hp)
|06-23-2013 07:47 AM|
|06-22-2013 11:51 PM|
Some pretty dumb replies here..
It doesnt matter what motor you have.
You better go tell all those toyota guys on 37-40s with stock 22r 4 bangers that it cant be done, or that it is a waste of money.
I had 42in Bias TSLs on my blazer and it was a little chunky untill i drove about 5 blocks down the road and they smoothed out and drove perfectly fine. A coworker Daily drives his Dodge with 42in pitbull rockers and he says they ride great.
4.88 with 38 will not be bad at all. Especially with those TSLs because I bet they are probably closer to 36 36 1/2 in tall. You wont be able to use 5th gear, but it should cruise in 4th on the freeway with out much issue.
When i had 35in TSLS and 4.10 gears I was able to hold 4th all day on the freeway and had no issues cruising up the mountain. 38s with 4.88s puts you at 2800rpms in 4th as opposed to 2500rpms in 4th like i had. This is a great rpm range for the 2.5.
And the ax5 will be fine. Dont drive it like a idiot and bang gears or drop the clutch all the time and you shouldnt have an issue. One of my friends with 40s still has his ax5 and has been wheeling with it for 6 years now on 40s. Other friend has 39 Bfg reds and no issues for a couple years. I have been wheeling mine for 2 years now and it still shifts just as good as it did before.
|06-22-2013 08:08 PM|
|95YamJam||I never drive to trails any more. Most are over 100 miles away. It is so much easier for me to trailer it to the trails. But i do Daily drive it in town without issues.|
|06-21-2013 12:15 PM|
|petercass88||Haha many of the good trails around here would require some highway driving to get to and from so sadly it would be up on the highway on occasion|
|06-21-2013 09:19 AM|
|95YamJam||I run 36" tsl super swamper RADIALS on mine. Way quieter and better road manners than my old 32" bfg km2's. Bfgs were new. Super swampers were. Almost new. Btw 4cyl 5spd. Stock gear. Does fine as an in town dd. No highway stuff really. 55 is about max speed. Lol!|
|06-20-2013 09:46 PM|
Good to know that swampers are crap on the road though... that definitely impacts my decision. These wheels this guy is selling has massive lugs, basically brand new swampers.
It sounds like leaving the 4.88s in there would be a bad idea. I really dont want to regear it so i think i am going to hold off. I needed the reality check!
|06-20-2013 09:42 PM|
Here are the axles though:
|06-20-2013 05:34 PM|
With the proper gearing you can make it work. But is this your DD? If it is you don't want a bias ply swamper. They are loud as hell and have the manners of rosanne barr at a buffet.
When I first bought my YJ it had 36" Swamper TSLs on it and it was hell! Every little crack or dip in the road it felt like it wanted to lurch that direction! Oh not to mention bias ply are great offroad but wer like crap on pavement.
|06-20-2013 03:58 PM|
|OverkillYJ||Yeah, that doesnt make much sense though. Who the hell would put those axles on a 2.5? All that money into a 4cyl. Seems like if it was going to be built like that it would not have the 2.5 in it any longer. Those axles would be worth more than the rest of the entire Jeep. I know for front and back Dynatrac D60's you are looking at a ballpark of $10k new.|
|06-20-2013 03:07 PM|
|petercass88||I do not have any pictures at the moment but I will take some previous owner did the swap - they are dynatrac D60s. I have had some people here on the forums discount them as NOT being D60s however considering how massive they are, the tubes are definitely far larger than 1.75 inches.|
|06-20-2013 02:39 PM|
|OverkillYJ||I dont know. I got 33's with 410 and a 2.5. I couldnt imagine going to 35's without regearing which probably wouldn't be too far off 38's with 4.88. I know people do it, but it seems like spending money on other things to make it more driveable is the best way to go. Unless it is off road only.|
|06-20-2013 02:31 PM|
|forsaken82||i had a 4 banger with 5.13s and it would do 80 with 39.5s. i eventually blew the motor but that was do to a seemingly bottomless hole not the tires. i say do it!|
|06-20-2013 02:10 PM|
With 4.88's I'd just jump up to 35's or 36's an be done
|06-20-2013 02:08 PM|
|06-20-2013 01:55 PM|
|petercass88||Swapping 4.88s for 5.38s would probably be the right way to go but then buying about 900 in tires turns into about 3000 in tires (or more)|
|06-20-2013 01:54 PM|
|petercass88||I dont wanna turn it into a turd I would be happy with swapping my 33s for 35s though.|
|06-20-2013 01:53 PM|
|OverkillYJ||You would need somewhere around 5.71-6.17. I would say 6.17 just because of the weight. Bigger motor is still better way to go though.|
|06-20-2013 01:21 PM|
|Dixie fix||I think you would be fine, honestly I'd look for 5.13 gears or even 5.38 but not gonna hurt anything with that much gearing. It will be a turd though.|
|06-20-2013 01:19 PM|
|06-20-2013 11:58 AM|
Hmm this sounds like a long project that I dont want to deal with right now lol! I appreciate the thoughts all, I will let the temptation pass...
Its an addiction
|06-20-2013 10:58 AM|
|06-20-2013 10:48 AM|
As far as the motor...why do you say? What is so different about the jeeps than all the other rigs out there that compensate for motor size with gearing?
|06-20-2013 10:45 AM|
|OverkillYJ||If you want to go bigger than 35's you should swap the engine, and the transmission. I am assuming you have a stick not an auto. AX5 will go pop over 35". Even with 4.88. If you want to go big you should drop in a new motor/trans combo.|
|This thread has more than 30 replies. Click here to review the whole thread.|