|06-24-2009 06:04 PM|
|dooder||obviously you need bell housing and slave but will also need a clutch fork and maybe a later style throwout bearing. one thing to also look into is the clutch master if its a different piston size which will make a difference if so.|
|06-23-2009 11:54 PM|
Internal slave to external slave ???
I am about to change my leaking slave cylinder and clutch on my 92 YJ 4.0L. The slave cylinder is an internal. I have heard some say that it might be smart to swap the bell housing to an external setup. So the next time the slave goes bad, I donít need to drop the trans. What all do I need to accomplish this? How difficult of a job would this be? I would appreciate any feedback.