|07-01-2013 11:07 AM|
|TeraFlex||We changed the design to something a little more user friendly so that you have one less thing you have to worry about greasing, unfortunately the instructions didn't get updated as well. You are correct though the stud end does go on the swaybar, similar to factory.|
|07-01-2013 07:16 AM|
|Grinders Dad||I think I need to flip them with the ball stud end on the sway bar, the outboard position is fine for both ends.|
|07-01-2013 05:25 AM|
|kjeeper10||Pic I have of TF links|
|07-01-2013 12:38 AM|
|C-Ron||the end with the grease fitting goes on the botton and on the inside. The other end without grease fitting is on the outside|
|06-30-2013 10:41 PM|
|jrussblues||Post a pic|
|06-30-2013 05:14 PM|
Teraflex sway bar links, which way to install?
I installed the teraflex 2.5" BB kit today on my 2013 JK, got the kit with the spacers, not the spring kit and also installed OME shocks too. I noticed the rear sway bar links they supply are not the ones described in the instructions OR on the video on the TF website, they are greaseless and have one end with the oem style ball socket . Does anyone know the proper way to install these, if you follow the instructions the have a terrible side to side bind on them which cant be right, I ended up installing them with the ball stud end down and both ends OUTBOARD of the mounting points, they are plum with no binding and wheel clearance is fine. IS this correct?