|07-02-2013 06:13 PM|
|Vin||TeraFlex Product Highlight:JK Monster Front Forged Adjustable Trackbar (1753418) - YouTube|
|07-01-2013 09:51 PM|
|terrabit||Thanks guys! I think I have the general idea. I'll post the results as soon as I get a chance to install it.|
|07-01-2013 08:16 PM|
"When centering the axle be sure to measure from identical spots on either side of the frame to the inside of the tire. Be sure there aren't tire lugs or lettering, or frame brackets, etc. affecting your measurements. DON'T USE THE BODY OR FLARES as a guide, they can be off significantly side to side. You're trying to get the axle centered under the frame, not the body"
|07-01-2013 08:04 PM|
|07-01-2013 07:37 PM|
Easiest way I've found to do it.
- park on level ground
- remove factory TB
- shake jeep around, it should center itself
- adjust new TB to match the mounts but do not tighten jam nuts
Some tires have a mold line. Grab the spring perch and if you don't have a mold line, find a common point on each tire.
- make your fine adjustments if needed
- tighten jam nut(s)
- recenter steering wheel
- enjoy centered axle
|07-01-2013 07:18 PM|
here's a link to front end adjustment: Basic Do-it-Yourself Jeep JK Wrangler Front End Alignment
essentially, level at ride height, measure how far your tires stick out on each side. take the difference, divide by two, and that's how much longer you need to make your trackbar
|07-01-2013 07:12 PM|
Got a new Metalcloak trackbar scheduled for delivery today. So ... how do I adjust the damn thing? Yeah I know, with a wrench. But how do I get my axle to be dead nuts centered?