|07-02-2013 07:20 PM|
|90DesertTanYJ||The caliper is stuck on the pins it rides on. Look at an FSM or Chiltons and you will see em. They are underneath the rubber boots that bolt to the caliper bracket. Very common for the caliper to hang up if the boot is missing and/or the pin is corroded.|
|07-02-2013 05:03 PM|
|The Silver Gorilla||Not trying to put this thread off topic http://www.wranglerforum.com/f8/odd-...nd-253227.html Wana explain maybe how to get that unstuck?|
|07-02-2013 04:08 PM|
|07-02-2013 03:54 PM|
|The Silver Gorilla||I have a stock center console, but overkill i might need those break lines. Im about to go and look at my breaks cuz it sounds like my drivers side is rubbing.|
|07-02-2013 01:09 AM|
|Jeep_Gypsy||Overkill if you hear about a external slave AX-15 bell housing let me know? I came down on a rock and broke a 8 in. gap in mine.|
|06-24-2013 05:44 PM|
I am willing to trade everything here. I am in Philly, some of the bigger stuff I would do in person unless the trade was worth the shipping.
DAYSTAR 1987-1996 EXTREME DUTY ROCK RAILS (PAIR) KJ70032BK (Unused)
Dana 35 Inner Axles
Stock Bumper with good black paint and tow points
21 Spline TC NP231 4cyl
Spare tire with Lots of good tread and rim 29" P225/75R15
AX15 Bellhouse (Internal Slave)
Tail Lights (One w/minor dmg)
$35 Pass Side Riser
Stock Jack minus the mount under hood for it
Driver side door various parts
Rear View Mirror Door hinge mounts (Stock Charcoal)
1.5" TC Drop (With 5 out of the 6 bolts) Can Pick up 6th at hardware store for $2
5 3" Body Mounts Plus 1 front, 1 rear stock mount unused
Single Door Handle
Two NP231 Transfer Case Main Shafts
NP231 Shifter For and Shift fork rod
Other misc NP231 Parts
NP231 Rear Cone, minor damage but will work fine
AX5 Mount Plate with Exhaust Support
AX5 Mount (Rubber piece)
13" Driveshaft for AX5 to AX15 Swap With New UJoints 1330 Ujoints
Used but working Stock Front Brake Lines
Throwout Bearing Fork AX5 AX15 Possibly Others
NP231 AX5 Combo 4WD Shifter With Adjustment rod and Linkage for NP231
Rear Light Stainless Covers
2.5 Throttle Body
Pair of Stock Shackles
Sway Bar Connectors
Trackbar relocation Mounts
1330 Dana 35 Yoke
|06-24-2013 05:35 PM|
|Jeep_Gypsy||I forgot about anyone want to keep it around I still have all the parts I listed but TJ fenders|
|01-01-2013 05:24 PM|
|Jeep_Gypsy||In cleaning out some of my garage. I've got 4 work lights all 55w and work. 4 on door mirrors for half doors with good glass. The frame and all the windows for a soft top.|
|12-31-2012 05:40 PM|
|stykthyn||I have a set of black mirror brackets for half doors|
|12-31-2012 04:07 PM|
SO I'm not sure if y'alls seen the thread over in the TJ forum about trading out free parts but I think it's a good idea and am willing to try it here.
I'll start with:
Interior door panels in grey.
Full carpeting for a 87-91.
Front and rear drive shafts.
Set of TJ rear fenders grey.
You pay shipping.