|07-08-2013 03:41 PM|
|07-03-2013 09:08 PM|
Back to changing the differential and transmission oils I go.
|07-03-2013 04:30 PM|
|Cape Fear Finn||And I lost sleep over this?!|
|07-03-2013 04:18 PM|
That was it. I took your post into consideration too. Thanks!
I know dad had the exhaust manifold replaced years and years ago.. I'm guessing they replaced that portion of the exhaust too.
Now that the wild goose hunt is over with.. *whistling*
|07-03-2013 04:04 PM|
|07-03-2013 03:44 PM|
|jherrington||I may be an idiot. When I took my skid plate off, I noticed some rubbing on my cat. Didn't think anything of it. Now I think my exhaust has been hitting my skid plate. Il check that out when the pipes cool off. *facepalm*|
|07-03-2013 03:31 PM|
|JimsJeep||What about a bad pilot bearing ? Just thinking maybe.|
|07-03-2013 02:50 PM|
|07-03-2013 02:44 PM|
|tbensor||starter engages fly wheel. If starter is remaining in contact that could still be it.|
|07-03-2013 02:40 PM|
Still get rattle with clutch in.
Clutch isn't spinning. Transmission isn't spinning. The only thing in there that's moving is the flywheel. If its not that, I'm a seriously confused person then.
|07-03-2013 11:26 AM|
|tbensor||are the bolts on the starter tight?|
|07-02-2013 09:15 PM|
I think I'm just going to take it to my mechanic. He changed out the clutch last year, so if its one of those parts, it should be under warranty and all I have to do is pay labor.
Unless someone convinces me to not spend upwards of $600 to get whatever it is fixed.
|07-02-2013 07:57 PM|
the bushing is there. Dad must have replaced a piece of exhaust piping because ive never seen the exhaust mounted there.
Again, you can feel the bump. not just hear it.
|07-02-2013 07:52 PM|
|07-02-2013 07:33 PM|
It doesn't sound bad in the video, but believe me. its a scary sound.
Engine seems to stop a little quicker. I also get a nice pop upon start up.
|07-02-2013 07:27 PM|
|07-02-2013 07:26 PM|
|07-02-2013 07:12 PM|
|07-02-2013 06:50 PM|
|Cape Fear Finn||Does it sound any different if you turn it off with the clutch in or with the clutch out in neutral?|
|07-02-2013 06:36 PM|
|jherrington||Jeep wrangler klunk upon shut down - YouTube|
|07-02-2013 02:08 PM|
|07-02-2013 09:04 AM|
|tbensor||motor mounts good?|
|07-02-2013 09:00 AM|
NOT the transmission mount. It is still in place and intact.
|06-29-2013 06:27 AM|
|jherrington||Update: now getting vibrations when getting to about 2k rpm. I'm talking mad vibrations. Not violent, but high frequency.|
|06-29-2013 05:34 AM|
|06-28-2013 11:21 PM|
|Cape Fear Finn||Worn transmission mount?|
|06-28-2013 09:24 PM|
Loud thud after shut off/turn on
For the past few days, when cutting the engine off, I get a loud thud from beneath me. As if someone took a rubber mallet and hit my transmission.
This isn't EVERY time, but 90% of the time. I cannot replicate the thud if I just crank it up and cut it off. I have to have driven somewhere.
Now, for the thud on turn on, it's the same thud and then engine almost hiccups
It's a stick shift. It doesn't sound like its coming from the engine. So, clutch? Flywheel?