|07-09-2013 06:57 PM|
I would flush it out again. Make sure to really clean it out inside with some brake cleaner spray. Let it sit to dry out for maybe 30 mins, then refill. Hope this cures it.
|07-09-2013 11:08 AM|
|07-09-2013 10:44 AM|
|Water Dog||Sounds like bearing noise to me. Possibly all the water washed the lube out of a bearing.|
|07-09-2013 02:54 AM|
|Timelord83||back to the top see if people can give me any insight since I added the video|
|07-06-2013 11:47 PM|
FINALLY got the noise on video..starts at 8 seconds when i push my phone up under the dash towards the engine and around 20 seconds its clear as a bell.
sorry for the dropbox link its way faster than trying to use Youtube, and i don't want to risk them down sampling the audio.
|07-06-2013 10:41 PM|
|07-06-2013 10:04 PM|
Um. It looks to me that u had a bunch of water in there. I would do another fluid change and clean her up real well, and I am betting things will quiet down. Use a high temp lube like Amsoil I would recommend.
|07-06-2013 09:09 PM|
Here are some pictures of the diff that i took during the fluid change.
|07-03-2013 06:10 PM|
|Newly installed long arm||Do u have a way to lift the rear end off ground and c if u still get the noise r not if no noise u will no for sure it's something to do with the front|
|07-03-2013 06:00 PM|
|98 tj sport||R u sure its in the front if so just take off the front driveshaft till u can get it fixed this should also let u know if its front or rear I would think|
|07-03-2013 04:36 PM|
Any lift? I had a whining noise after my lift install. Had to adjust pinion angle just a hair with the rear control arms...mine was from rear. Went away.
|07-03-2013 04:11 PM|
|07-03-2013 07:33 AM|
|Newly installed long arm||Where u on concrete trying to turn when it wanted to try to hop|
|07-02-2013 08:42 PM|
|Timelord83||So it seems fine in 4hi but in 4 low it acts like the wheels want to hop not spin so i took it right out of 4 low before it did any damage. The whirling noise is louder in 4x4 but takes the same speed to get it to start.|
|07-02-2013 06:04 PM|
|07-02-2013 01:06 PM|
|Newly installed long arm||I've never heard a whirling noise come from a front r rear end does it change when u put it in 4wheel drive r stay the same|
|07-02-2013 11:06 AM|
|07-01-2013 07:13 PM|
|Newly installed long arm||Put some Lucas in and drive It till it quits|
|07-01-2013 07:05 PM|
|06-30-2013 08:24 PM|
SO my wrangler makes a whirling noise while in motion and only motion after excluding the transfer case and wheel bearings my mechanic said it could be the pinon. So I am sure also its something on the front differental as well. So today I did a fluid change and after the noise is quieter. I am going to assume that hes right but I need to price a new pinon and such.. Any suggestions as where/brand to get one. Hes a decent guy lets me bring my own parts and only charges me $35 an hour if after getting the parts myself i don't think i can pull it off in a weekend.