|07-04-2013 09:17 AM|
Go to 1:35 for visual and audio instruction. Or watch the whole thing for complete knowledge.
|07-04-2013 07:03 AM|
|07-04-2013 05:38 AM|
|Neal5280||Pictures would help a lot for this...|
|07-04-2013 05:27 AM|
|07-03-2013 08:08 PM|
|Airtight||yes, they are on the cloth part on each end.|
|07-02-2013 05:23 PM|
|07-02-2013 05:21 PM|
|07-02-2013 07:07 AM|
|NoBoat0429||Those little clip/covers go on and off when door is closed to keep the bottom of the "window" taught. The slider bar fits into the receiver channel a spefific way and will "lock" into position when zips are down. You may need to slide the bar either way so it's a perfect fit. There is a specific way mine slides in. I have a supertop from bestop.|
|07-02-2013 06:23 AM|
|Airtight||Did you pull the little plastic clips on the soft top out of the channel on each side first? One on each side, about two inches or so long.|
|07-02-2013 06:00 AM|
|Neil F.||?????? You twist up a little counter clockwise to remove from the clips on either side, down clockwise to install.|
|07-02-2013 05:25 AM|
Soft top rear window bar
I cant tell what is up with mine, I know you are able to "remove" it so you can roll up the rear window, but when I installed my soft top today, mine wouldn't budge. Not sure if im trying to remove it wrong, or if its screwed in, but I cant get it off. I don't want to break it by bulling too hard either.
Any ideas? I can provide a pic if needed.