|07-14-2013 12:31 AM|
|07-13-2013 05:55 PM|
|lambsb||I wish I'd seen this post earlier. Hope its not too late to help. They make a vinyl eraser that is a 5" diameter wheel that you put in a drill. Use the cream colored type not the red. Gettem from parts house that carries paint n stuff. That's what we use, I work at a vinyl shop. Takes the struggle out of removal. Just go slow and if you wear the disc too thin use caution it is molded around a metal disc. Won't hurt the paint when done right. Takes care of the sticky left behind too. Then wipe it down with rapid remover or similar product. Happy Jeepin!|
|07-10-2013 06:02 PM|
|07-08-2013 01:36 PM|
|zracTA||just don't put too much heat near it, take it easy or you could damage your paint|
|07-06-2013 03:32 PM|
|Wranglin4Life||I guess I will give the heat gun a try and see what happens and then get the eraser wheel if needed.|
|07-06-2013 12:29 PM|
All I had was the standard TJ lettering. I peeled all of it off with a thumbnail until I could get a big enough piece to pull the whole thing off.
Cleaned it with alcohol to get the residue off, then put the new lettering on.
|07-06-2013 11:11 AM|
And be glad it wasn't them splash graphics. Mine were on for ~10 years, then got pulled off. 9 years later, you can see a sheen where they were, but it's not bad at all. Way better than leaving em, though I like the purple hood pinstriping. =)
|07-06-2013 10:25 AM|
|1jeeplvr||Depending on how long they have been on expect some paint fading.But id take some fading over those horrible stickers anyday|
|07-06-2013 10:07 AM|
|Carlsbad0331||But let someone do it who has done it before... Ive seen more than one disaster with a heat gun and eraser wheel. It doesnt take alot to burn right through the paint!|
|07-06-2013 12:13 AM|
Seriously though +1 on the heat gun and eraser wheel.
|07-06-2013 12:09 AM|
|krisbman||Either a heat gun or an eraser wheel will pull them off. If they've been on there for a grip an eraser wheel will probably be the best bet.|
|07-05-2013 06:17 PM|
|sandnsaltwater||A local body shop should be able to do it for you. Should not be much...I had the dealer take mine off. They just put a heat gun on them and peeled them off. Good Luck!|
|07-05-2013 03:47 PM|
Best to get rid of these graphica
So my wrangler came with these horrible looking graphics that I would like to get rid of... What's the best way to get them off?