|07-15-2013 03:43 PM|
|07-14-2013 03:59 PM|
|NoBoat0429||3 prong fog light switches need a hot 12v lead to light up|
|07-12-2013 07:06 PM|
It's the OBD-II connector.
On-board diagnostics - Wikipedia, the free encyclopedia
|07-12-2013 09:29 AM|
|KhaymanOIF09||If it would be a hot wire what would be the purpose of it going to the wiring harness for the door and being attached to the white wire? I'm at a loss with what the previous owner was doing with it.|
|07-11-2013 01:28 AM|
touch your tongue to it and see what happens!
its probably a hot wire for some accessory the previous owner installed.
|07-11-2013 12:04 AM|
|NoBoat0429||My opinion is that red wire is a Hot lead either off the battery or the fuse box. A few tj models, including mine, a 2000, have 2 hot leads off of the fuse box behind the glove for accessories. There is a red, which is always on, and a blue, which works off key in pos 2. Trace that red wire to see if its live, was most likely hot for a cb, fog light switch or something. The little computer port is for the mechanic scanner for the codes if i'm not mistaken.|
|07-10-2013 06:27 PM|
|07-10-2013 06:17 PM|
plug and wire under dash by driver door.
Hey all sorry this is my first post but everything else I had problems with i was able to search and find the answer. I have a plug which looks like a computer plug under my dash by the driver door. Also I have a red wire that was electrical taped to the wiring harness by the previous owner spliced into. I unhooked the wire and everything is still working fine any ideas?