|07-10-2013 09:19 PM|
I cant say enough words about how awesome DT is.
|07-10-2013 09:08 PM|
|D.B.||Thanks for the feedback and advice!|
|07-10-2013 09:06 PM|
You don't have to...it's your money and your ride. I was nervous to do my lift, but once I started I wasn't overwhelmed and was really happy I did it myself
On the wheel/tire note, call the guys at discount tire direct. They are really good to deal with, have a lot of info, and are cheaper than anywhere else I've seen. (I know you have another thread asking about the tires, put my vote down for duratracs. I've got the 33s and have loved them.)
|07-10-2013 08:49 PM|
|D.B.||So I guess I should do the lift myself if I want to keep calling myself a true jeeper!...lol|
|07-10-2013 08:46 PM|
a little bit of research and some time under your jeep will make you learn a LOT. they really arent that complicated once you familiarize yourself with various components.
you can do the "alignment" yourself. hint: It's a 15mm wrench. our steering geometry doesnt change based on ride height like a TJ would. all you have to do is center the steering wheel.
|07-10-2013 08:42 PM|
4inches looks great, but its not really needed. Many stick to 2.5 which will give off a higher than advertised lift to accomodate your future plans for upgraded bumpers, winch, armor, etc.
2.5' will also run you less than a 4' will because there's less parts needed to run correctly. you can also install the lift yourself as long as you try. i wouldve done mine myself however i just don't have the time.
|07-10-2013 08:30 PM|
|traitor08||After my lift, went to get it aligned, my buddy has the stuff to do it, and he never touched it. Said it was still in factory specs. After drivi g it for about 5k miles, I haven't had to do anything yet.|
|07-10-2013 08:28 PM|
|vacca foeda||Get the new bolt kit from northridge or someone, grab a buddy or two, and block out a day to do it. It's not hard, just follow the instructions and you should be good. My buddy and I had 0 suspension experience and it came out great... No need for alignment or steering correction.|
|07-10-2013 08:08 PM|
OK so I am with you all on the 2.5 versus the 4" lift.....you sold me on that. However, I am just shy installing the lift and not sure how to know where you can take a new lifted jeep to correctly get the alignment right and the steering wheel back to center if it does get moved in the process of the install. Other than the local alignment shops like firestone or something.
Another thought....to save cash, the BB seems so much more budget friendly however I have heard so many negative things such as, bad ride, cant be used for any real off roading and so on.
I know I will need the super chips flash unit to reset the tire size in the computer which will also allow the computer to self adjust for the change in regards to performance however, I have read so much about death shakes and all that crap that I am really hesitant about pulling off such a project.
Hell it looks super easy via youtube video's and I have all the right tools and high jack stands but it seems like a risky project when its your new jeep thats your DD.
|07-10-2013 10:11 AM|
2nd, there's really no alignment other than steering and toe unless changing control arms/track bars/etc. these are easy to do with a little bit of research/learning.
Or find a reputable alignment shop to do it afterwards.
|07-10-2013 09:44 AM|
|D.B.||I would like to just purchase and install the lift myself (saving money) but I have to be honest I am worried I am going to mess something up! The bigger issue for me is making sure the alignment is done right......you just take it to an alignment shop after the install and they can get you are set up right? Any basic alignment shop will do?|
|07-10-2013 05:47 AM|
|Snowboard One||Don't buy procrap. 4 wheel parts owns them and push them on people that don't know. I went with a 3" BDS with the upgraded Fox shocks which is far superior than procomp. I got front trusses welded on and lower arm skid plates welded on for added strength to the front axel. I got 5 Ballistic Jester wheels flat black with red accents wrapped with 35" Goodyear muds with the Kevlar side walls. All for under $5000.|
|07-10-2013 02:37 AM|
|Tweak||I love my local 4wp because we know them and have beers with them occasionally, but do not let them do this to you. they tried to charge me $450 to install exhaust spacers when I was a noobie.|
|07-10-2013 02:31 AM|
these prices are just reference and prob can negotiate less.
Lift = $1000 +/-
35" tires $2000 +/-
Total = $3000 +/-
There's always people local will to help and teach
with install = beer/pizza
Saved $3000. A budget boost like this is less and another option.
A happy D.B because he saved a boat load of cash
|07-10-2013 12:01 AM|
Go 2.5" and avoid all the hassles associated with messing with your geometry, and spend a fraction of what you were planning!
Here's a random pic of a guy running 35s on a 2.5" lift. Looks like "weekend warrior type off the pavement fun" lol:
|07-09-2013 11:12 PM|
|dawhitesJKU||do not let 4wp install your lift!!!! You'll find other quality shops that do it for much less. You also have the wf community to help out.|
|07-09-2013 10:57 PM|
|D.B.||I will only be doing weekend warrior type off the pavement fun, nothing crazy. The jeep is a DD and not looking to make it a monster or super crawler of any type.|
|07-09-2013 10:56 PM|
|D.B.||Question.....so I have heard wrong, that BB do not ride well and are a temporary fix to getting lift?|
|07-09-2013 10:55 PM|
|D.B.||hhhhmmmmmm.....you guys make great points!|
|07-09-2013 10:15 PM|
|vacca foeda||A budget boost would be more affected by the bumpers and winch (stock coils with spacers). A higher quality spring lift would work fine. You'd save money on the lift and it would be a little easier if you have to deal with parking garages or for people to get in.|
|07-09-2013 10:15 PM|
|07-09-2013 09:58 PM|
|D.B.||Good to know.....thanks for the feedback!|
|07-09-2013 09:54 PM|
|kjeeper10||Not with quality coils. Most aftermarket coils run 1" or so over listed height unloaded.|
|07-09-2013 09:44 PM|
|D.B.||Ya I haven't found the money yet...lol.|
|07-09-2013 09:43 PM|
|D.B.||I am looking at the 4" so I don't loose anything when I get bumpers and a winch. The smaller lift will be more effected by the added weight....or am I not correct on that assumption?|
|07-09-2013 09:41 PM|
$3k for lift alone.
What somebody could do with 3K
|07-09-2013 09:41 PM|
|D.B.||That is included!|
|07-09-2013 09:40 PM|
I'm sure you already know, but once you get over 3", you need a lot more stuff ie new front drive shaft, etc that won't be included in that price I wouldn't think.
For 35s, you can run them with a 2-2.5 lift or no lift and flat fenders with a pinch seam trim, I believe. I'm sure someone will correct me if I'm wrong.
With the smaller lift, you can do it yourself pretty easily and save yourself a couple of hundred bucks in labor while learning a bit more about your jeep.
|07-09-2013 09:34 PM|
Feedback on a price quote
Just got a final quote from 4 Wheel Parts on a 4" lift with 35" tires for my 2012 Sahara 2dr......$5500 complete install. The lift will be a Procomp lift. Does this price seem high?
Just FYI, test drove a 4dr with 3:21 gears, 4" lift and 35" tires and I have to say it was not bad at all! There is a small loss in power from a stand still and the tranny will find 4th and 5th more often but other than that I was sold! Which is why I am now considering the same set up for my 2dr with 3:21 gears.