|07-11-2013 08:44 PM|
|07-11-2013 06:18 PM|
A 48" bar jack won't fit strapped to the B pillar, but if you've used one, you know they get hairy over 2' anyway.
I cut 3" off the top of mine, and now it fits great strapped to the B pilllar.
|07-11-2013 04:13 PM|
Finally had time to take a photo of the bracket. I know a little overkill, but it got the job done and was fun to build. I would change somethings, but hey it works.
Sorry about the trashy back
|05-16-2013 10:29 PM|
|98 tj sport||
|05-16-2013 08:24 PM|
The high lift is great for recovery (ruling out how slow it can be). But not for much else.
|05-16-2013 04:37 PM|
|05-16-2013 03:50 PM|
|05-16-2013 03:49 PM|
I tried to go higher but couldn't due to the large base at the bitten if the jack. I went to the dollar store and bought pool noodles to cover it when people ride in the back.
|05-16-2013 01:53 PM|
|05-16-2013 01:09 PM|
|05-16-2013 12:19 PM|
|05-16-2013 09:52 AM|
|Firehound12||I will get one today|
|05-16-2013 07:26 AM|
Side note...The "He" that you reference is a "She"
Anyway. I don't have the money to buy a wench at this point. I am working on that, so for the time being the Hi-lift was the best solution.
Firehound12...Do you have a photo of what you did?
k.wag...Good call on the bike lock. Will have to do that.
|05-15-2013 09:17 PM|
|05-15-2013 08:35 PM|
I used mine within a week after getting it. found a mud hole where I high centered the axles. There were no trees or rocks that would provide a winching mount if I had one. I pulled out my hi lift, jacked up my rear bumper pulling both rear tires up in the air, tipped the jack over which then set both tires down outside of the ruts, and I was able to drive on out.
And for those who can't afford winches (not all of us have $400+ lying around) a hi lift makes a good substitute in the mean time.
|05-15-2013 08:19 PM|
|Rubicondon53||I used to be a skeptic about dragging around my hi lift.. Until I had to replace an axle on my trailer along I-70 in the western side of Kansas.. I was going to leave the hi-lift at home, thankfully my wife insisted we bring it. We would have never in a million years been able to swap out axles without it.. Yes, a good bottle jack will lift your axles, but it will not lift your frame... I carry both, always.. The very best place to carry a hi lift is up top on our safari racks. Easily accessible, and it stays clean up there, away from road grime, trail dirt, and mud.. Of course, to each his own.. Just my experience and opinion...|
|05-15-2013 07:41 PM|
Have to agree, the Hi Lift in that spot is more trouble then it's worth. Just ditch it or find a spot that is less in the way. I carry a Hi-Lift but it's out of the way on the bumper so it never bugs me. I don't really know why I even carry it.
For the record, I have never used my Hi-lift jack on the trail. Ever. The only time I used it was to pop a bead just to try it.
|05-15-2013 07:30 PM|
|free78||Maybe he doesn't have a winch. A hi lift can be used for more than a tire change. You are correct though, a bottle jack will work with 35s. Some of you guys take some stuff a little to serious.|
|05-15-2013 07:09 PM|
|05-15-2013 06:47 PM|
|05-15-2013 06:45 PM|
|K.wag||As far as lock up goes, used a U-bolt bike lock I had lying around, fits through the holes on the jack, and locks it to the roll cage. No one is getting my hi lift without unbolting the cage anyways, and if they are willing to go that far, I have more things to worry about than just my hi lift|
|05-15-2013 06:45 PM|
|Big Cole||Ditch the hi lift. The stock bottle jack is sufficient to change a tire.|
|05-15-2013 05:14 PM|
|Firehound12||I have my jack in the same spot. I had the same issue. I moved it up, just above the rear seat (4-5 inches). I haven't had any clearance problems since. I went and bought one of those foam pool noodles, and wrapped the jack in case anyone sits back there. Not bad for a $1.|
|05-15-2013 04:47 PM|
Summer Top with Jack
Recently I made a bracket very similar to what I have attached, also in the same location. However I have noticed with a soft top, it seems to be in the way when I want to take it down. Has anyone else had this problem?
What I want to do is get a new top, kind of like a Bikini top and then the piece to cover the back. But if I do this then the hi-lift will be out in the open. Anyone have any recommendations or has dealt with this?
I have an 06’ if that matters.