|07-19-2013 07:45 AM|
Thanks for responding everyone. I'll probably start ordering stuff next week. A few updates to my build list:
1. I'm going with the AEV Pintler wheels. Their backspacing is the tightest of anyone's wheel and I've been assured that the tire clearance won't be an issue. I like AEV's conservative build philosophy. I have a couple of deep snow wheeling trips planned for this winter that will require chains. I'm hoping that 5.2" backspacing won't come back to haunt me trying to squeeze in chains. Guess there's always spacers for the few times a year when I want to use chains.
2. I added the Artec front armor axle kit to the built list. Thanks for suggesting this.
3. After much research, I've decided to go with the Eaton eLocker for the rear. I already have an eLocker on the front which I like and I don't want to mess with an air compressor if I don't have to. The 2 pin weakness on the D44 eLockers has apparently been addressed. We'll see...
4. The Goodyear Wrangler MTR With Kevlar's seem to be a good choice for all around wheeling. Good reviews, strong sidewalls, relatively light weight, and true to size @ 34.8".
Last call for someone to persuade me that I should be going the 37" route for my JK. 35's seem to be the sweet spot in terms of bang for the buck and what I think I'll be doing (Big Dogs V-Trail and Rausch Creek blacks). Of course, 6 months ago I thought 32's were fine.
|07-14-2013 02:58 AM|
The Duratracs are good tires for on and off road use. I've had guys on Duratracs go everywhere I did on my KM2s before I locked the front, but I also don't consider the KM2 to be any version of aggressive. The KM2, MTR-K, Duratrac, etc are all pretty much in the same book to me. The Forged JKU will be getting Pit Bulls or supporting the local manufacturer with Interco next.
Another point on the Duratracs... my uncle needed tires for his Rubicon and even knowing he takes it off-road (very mild stuff) weekly, we still set him up with a set of Duratracs because they're a great tire for mild off-roading but one of the smoothest ATs we've found for on the pavement. He's been super happy so far, even having replaced the factory MTs with ATs.
|07-11-2013 11:39 PM|
Goodyear specs them at 34.4. I call that a 34.
My 275/70/18 are listed at 33.4 and most would consider them a 33 not 34.
|07-11-2013 11:34 PM|
|07-11-2013 11:22 PM|
You guys so realize most tires are 1-11/4" smaller mounted ?
Same with stock and my Superchips default is 11/4" less than a 32" tire.
|07-11-2013 11:22 PM|
There are tires that are measuring a good bit less than the advertised size. The 35x12.50-15 KM2s on the Forged JKU are running at roughly 34.25" and my understanding is they're on the taller end compared to some others with KM2s.
At the end of the day, the tires are being measured unloaded. Wheel width, vehicle weight, tire pressure, etc will all cause different measurements, so just get the tire that serves you best and wheel the crap out of it!
|07-11-2013 11:19 PM|
That being said, I like to think I know more than I do, and I will default to the dude with more real life experience!
|07-11-2013 11:06 PM|
You don't measure the tire with the weight of the Jeep on it. That's like saying Jeep claims you have a 285hp motor but you're only getting about 210 to the wheels. Measurements are taken on the item (tire or engine, in this discussion) itself, not the item after it's been fully engaged into its intended function.
I stand at 6' 3" tall, but if you put a 5,000# Jeep on my shoulders I'll probably squat down AT LEAST 1.5" just like your tires did. :beer:
Just giving you guys a hard time!
The list does look good, despite a few questions.
Personally, I come from the school of locking the front differential first. We're running an Aussie up front with stock shafts and Spicer 760x joints with the factory limited slip out back.
If you plan to wheel routinely, you may want to consider looking for a more rugged suspension system, but I don't say that to start a big war.
If you'd like some input from someone who upgrades Jeeps on a daily basis and wheels a 2012 JKU like his wife stayed at home, shoot me a PM and I'd be happy to share any insight I can.
|07-11-2013 10:54 PM|
|07-11-2013 10:18 PM|
This whole thing about actual tire sizes being smaller than advertised sizes is irksome. The main reason I'm going to 35's is so that I can stop dragging my armor across the rocks. Big bucks just to get an inch and a half of additional ground clearance. Makes me want to jump to 37s.
|07-11-2013 10:08 PM|
A key requirement in wheel selection, which I did not mention earlier, is to be able to run at least Class S tire chains but preferably full size off road chains.
|07-11-2013 09:50 PM|
I appreciate the warning about the 2 pin eLocker for the D44.
In regards to the rear differential, my JK Sport has an OEM LSD (ordered as an option) and it's performed ok, I guess. Rear end swapping has been an issue in snow and ice conditions but I don't know it that's attributable to the rear LSD or not.
Awhile back I spoke to an Eaton engineer about going with one of their Detroit Truetrac limited slip differentials in the rear. He said that the Detroit LSD would be head and shoulders above my OEM rear LSD but suggested that I wait until I regeared or broke the OEM diff. Since I'm regearing now's the time. Do you feel that having a locker on the front and a limited slip on the rear is the way to go versus having lockers on both ends? The budget will allow me to go with an ARB or Zip air locker on the back if that's what it takes to make it a more capable trail rig. Snow wheeling on forest roads is my passion so I'm interested in the whatever works best in snow/ice conditions.
You ain't kidding about the D30 ring and pinion being smaller than the D44. Here's a pic: http://project-jk.com/gallery2/main....alNumber=2.jpg
What are your thoughts about cryogenic treatment for the ring & pinions? It's only a $100 for the front and rear R&P.
I don't mind carrying a spare axle but how long does it take to swap out an axle on the trail?
Derf, my 14 year old WV Passat is my daily driver. Thanks for bringing the ECTED to my attention. I got the JK mostly for wheeling and playing in the snow. The Auburn Gear ECTED in the rear is an option but I haven't seen it used widely on trail rigs in my neck of the woods.
|07-11-2013 09:30 PM|
|msubrave||With 17 inch wheels i assume you're going with 315/70/17 dt's which are closer to 34 than 35. The 3.73 might be plenty to turn 34s. I would try it before i spent a grand regearing...|
|07-11-2013 09:22 PM|
I wouldn't waste money in a true trac. I almost did but when you really really.need it. (1 wheel of the ground crawling) its useless. Also 4.5" backspacing isn't needed for 35s. I don't have 4.5 and I run 35s. The double beadlocks I will be running are also not 4.5. I'm not saying it isn't welcome but its definitely not needed.
|07-11-2013 09:04 PM|
|river2c||Looks good but aftermarket wheel backspacing should be 4.5" or less. I'd suggest ARB or a Truetrac for the rear axle.|
|07-11-2013 06:57 PM|
Looks good other then rcv shafts. That's total overkill for a d30 with 35s. I'd run a chromolly axle shaft.
I'm going to 37s and Im not running one there either.
|07-11-2013 06:56 PM|
|kjeeper10||If you wheel it hard .... Yes. Weekend warrior you can get by with the daystar bumps.|
|07-11-2013 06:55 PM|
|Big Fran||If your going to 35" make sure you have or get a HD track bar. There is a TeraFlex video that shows the stock track bar flexing with 35's.|
|07-11-2013 06:52 PM|
|07-11-2013 06:51 PM|
I have heard of locking/unlocking problems in the ECTED. I considered it as well.
OP, key is to weight how YOU will use your rig. There are no doubt that people run each of these traction devices successfully, with no problems and there are the few cases of failure, even in an ARB. I know, blasphemy! Just read up on each and select one for you.
|07-11-2013 06:36 PM|
|07-11-2013 05:58 PM|
Excellent, excellent list there. Looks like you did your homework. glad you are including a re-gear!
Two things I would not reccomend.
1. the D44 Eaton E-Locker. It is notoriously weaker than the D30 E-Locker, using only a 2 pin mechanism. For selectable out back I would suggest a Yukon Zip Locker. It is air just like the ARB but with out the ARB price and a better warranty. If you do not want budget for OBA then I would suggest a Trutrac LSD. Anything over the D44 Eaton. With the Trutrac rear and locked front, you rig will be HIGHLY capable.
2. I would keep the axle shafts in the D30 stock and carry spares. The D30 R&P set is much smaller than the D44 and putting beefed axles in the D30 moves the weak point to the gear set. IMO, you want the weak point to be the axle shafts.
But like I said great list.
|07-11-2013 04:31 PM|
JK 35" Wheel Project- What am I missing?
I'm planning on moving from 32" tires to 35" tires on my 2013 JK Sport auto transmission. I'm putting together a build list of what I need to purchase. Have I missed anything?
- Lift kit (Installed. AEV 2.5")
- Wheels (17" wheels with a backspace between 5.2" and 4.5").
- Tires (probably Goodyear Duratracs)
- Differential re-gear (4.56) Currently geared to 3.73
- Spare tire carrier (TeraFlex JK HD Hinged Carrier and Adjustable Spare Tire Mounting Kit)
- Front axle strengthening (RCV Ultimate Dana 30 CV Axle Set and Synergy Suspension Jeep JK Front D30 Inner C Gusset Kit)***
- AEV ProCal Module
Other stuff I'm doing along with the upgrade.
- Rear locker (Eaton eLocker to match what I have on the front end already)
- Rear bumper (GenRight aluminum)
*** I realize that I can probably get by with doing nothing for my front axle and that there is a school of thought that says wait until it breaks before you upgrade but I'd rather pay for the peace of mind of knowing that my axle is rock solid and won't fail me in the middle of nowhere and far from home.