|07-29-2013 04:48 PM|
Got it done. Left it out while I took the Cherokee to the dealership (frikken module went out, 1400 buck repair. This is why I'm anxious to get the Wrangler going, less costly!)
Anywho, it rained, so got the water christening. Held up well, looks good. Took a lot of work to get it down and get it cleaned up, well worth it
First, a before shot. Only one I have, should have taken some when I dropped it, but you get the idea...
And the after shots...
|07-27-2013 07:30 PM|
|Brig||Just put the 2nd coat on, looking good|
|07-27-2013 07:07 PM|
|2five22||Chassis black or industrial epoxy paint. A friend did his Detonator Yellow Jeep skid plates in earthmover yellow epoxy paint and it came out well. It's the same stuff used on J.I. Case and Caterpillar earth moving equipment, so it is durable.|
|07-26-2013 09:26 PM|
|07-26-2013 09:25 PM|
Then I won't piss away the cash on it, save it for something else.
It's the Eastwood primer recommended above.
Thanks for the input
|07-26-2013 09:19 PM|
|07-26-2013 09:15 PM|
|Brig||Because I haven't painted it yet, 2 coats of primer per the can's instructions, painting tomorrow, asking about a clear coat for after|
|07-26-2013 08:22 PM|
|07-26-2013 07:41 PM|
|Brig||Hit it up with 2 coats of primer, tomorrow I'll hit it with the paint. Did you use a clear coat at all, or does it stand up just fine without?|
|07-14-2013 01:02 PM|
|Brig||Just ordered a can as well as a can of primer|
|07-14-2013 08:34 AM|
|07-13-2013 08:15 AM|
|07-12-2013 10:03 PM|
|07-12-2013 09:57 PM|
Chassis Paint - Eastwood Extreme Chassis Black Satin
|07-11-2013 08:04 PM|
|Brig||Available at your regular auto parts stores? Auto Zone, Advanced, O'Reilly? How many cans did it take?|
|07-11-2013 07:57 PM|
|JimsJeep||Just did mine with Eastwood Chassis black. It is a nice coating made for that application.|
|07-11-2013 07:41 PM|
Painting/Bed Lining Skid Plate?
Dropped my skid plate today to better swap the exhaust...which will have to wait a few days so I can drill out some broken bolts. Noticed the skid plate and spacers are a bit rusted and could use a touch up. Question is, is there a certain type of paint I should use on them or will bed liner work?