|07-16-2013 09:47 PM|
|Colin||Almost 30K and 2 years on my DD tj with a Zone 3 inch lift and no problems.|
|07-16-2013 08:09 PM|
|07-16-2013 01:22 PM|
I've had good experience with my Zone 4.25" kit and my wifes 3" JK kit so I say go for it if it's what you're looking for. Why piece meal it if you can get everything for cheaper anyways when buying as a kit?
Don't let someone else try to convince you their opinion is a fact.
Good luck OP
|07-16-2013 10:46 AM|
To the OP: I have a 2005 LJ, with 33's, and I went with the ZONE 4.25" kit myself. I could care less what other people say about it, because it works great for me. I've been told there are "better" kits by people for not much more money, but funny how none of them wanted to cough up the extra money for me, haha! All in all, I love the kit, and it does everything I need it to, so I didn't spend any money I didn't need to.
To answer your question, I did not need anything extra (mine is an automatic). The toughest thing was getting the old shocks off. The nuts were rusted on, so I actually had to cut the front ones off, and I broke off one bolt in the frame on one of the rear shocks, so I just drilled a new hole and used a nut on the backside. So like others said. PB Blast the hell out of it for a few days in a row before you go to town. And read through the instructions, and kind of get your game plan and tool list together before you start. I did mine in about 14 hours start to finish (2 of those hours were spent removing the old shocks).
|07-16-2013 09:52 AM|
And when they do get a salvage vehicle Im sure the donor meets some minimal criteria.
My last post pertained to the kids who buy a cheap DD TJ on its last legs......rusted out, banged up, tons of miles, etc..........a vehicle not worth putting much money into.........I see plenty daily online and locally.
|07-16-2013 12:46 AM|
|07-15-2013 11:45 PM|
|07-15-2013 10:22 PM|
|Missoulatj||I am very happy with my zone lift, however if I was going to do it again I would purchase parts separately to create my own "kit"|
|07-15-2013 09:35 PM|
|07-15-2013 07:31 PM|
Granted if there is one Zone kit that makes the most sense its this one, but mix n matching for a specific user is always the best way to go. The "one kit fits all" mentality is backwards thinking.
|07-15-2013 07:10 PM|
|07-15-2013 05:47 PM|
The OP has an 06 LJ, which probably has a value of around $15k.
I asked the OP why he is looking into a 4.25" lift when he is only going to run 33" tires. He doesn't necessarily need that much lift to run that size tire.
I also asked him why he is looking at Zone. Is his budget that constrained? A $400 lift on a $15k LJ doesn't exactly make the most sense, especially when there is a lot better out there for not much more money.
|07-15-2013 03:33 PM|
|Water Dog||I helped J4J put one in about a month ago. The one thing he decided to add to the kit after we installed it was a Novak tc shift cable. It is not absolutely needed, but it is a nice addition, works really well, and eliminates the need for the linkage brackets. He has been very satisfied with the lift kit.|
|07-15-2013 02:18 PM|
To the OP, like others have said, make sure you PB the joints and bolts a lot. I've heard anywhere from a few days to a couple weeks. I'm sure you'll enjoy it. I know I have loved it. Handles well off roading and there isn't a lot you will need to do. Because remember, it's a 3 inch with a 1.25 body. Mine's an automatic and I didn't need to do really anything else. I opted for the tummy tuck, but it's something I wanted. We want to see picks when you get it done .
|07-15-2013 01:30 PM|
Read through the instructions a few times to get familiar with what you will be up against.
|07-15-2013 12:00 AM|
|Owen_TJ||Spray all your bolts with pb blaster or liquid wrench for like a week before you start the install...|
|07-14-2013 11:44 PM|
|Theellusionist||I've got access to any tools I need. So what will i need and what is the process?|
|07-14-2013 11:30 PM|
You will need either cam bolts for your lower control arms to get caster closer to where it should be or (better option) adjustable lower control arms.
I have the same lift on my 06 LJ with 33s I did not need to drop the TC
|07-14-2013 09:11 PM|
|07-14-2013 09:10 PM|
|07-14-2013 09:04 PM|
|NJO||Why a 4.25" lift for 33"s? Why a zone lift on an LJ?|
|07-14-2013 08:27 PM|
|Theellusionist||sweet, thanks so much. will i have to get an alignment after i do the lift?|
|07-14-2013 07:38 PM|
If you have a manually tranny, you might need to replace the shift boot with pleather one (if you have the rubber accordian one now). It will make shifting into 2nd and 4th easier.
You should not have to lower the xfercase, but if you have slight driveline vibes, then just install a few washers between the skidplate and frame.
Also after the install, your steering wheel will be upside down. So you just have to adjust the draglink to re-center the steering wheel...takes about 5mins to do.
|07-14-2013 05:57 PM|
Zone 4.25 lif
I'm looking into buying the Zone 4.25" lift and i was wondering if there is anything else I'll need for it besides the 1" motor mount lift that comes with it? I'm getting quick disconnects with it, and a track bar. I do moderate wheeling in the desert, nothing too major.
My other question is would I need to adjust the transfer case, seeing as it is bolted to the skid plate, which is bolted to the frame?
EDIT: I have an 06 lj running 33s