|10-08-2014 01:32 AM|
|jgalvar||Transmission Mount worked wonders for me. Thanks!|
|04-05-2014 12:42 PM|
|04-05-2014 12:32 PM|
Edit: I suppose I should check post dates...
|04-05-2014 11:44 AM|
|Cbamburg||I am having the same problem. Only bangs around for the 1st couple seconds. I don't know if I missed this in the thread but if it is infact the tc mount, will I be able to visibly see damage when I remove the skid?|
|09-07-2013 09:52 PM|
|OrdieCPO||Returned home a few days ago(finally), just changed my Tranny Mount and no more knocking noise!!! I wonder if installing the MML does damage to the mount? maybe there should be a step to remove the 4 Screws that attaches it to the skid plate prior to lifting the motor.|
|07-16-2013 09:33 PM|
|Jame||Thanks for the info CLE99....I guess I will get one ordered and try it out.|
|07-15-2013 10:57 PM|
|cleveland99||Pretty easy take off linkage put on boot n new brass bushing and bolt back up need two people when re install unless you can reach around the tub into the d side floorboard lol|
|07-15-2013 10:43 PM|
|Jame||Cleve....Thanks. I didn't know wether to buy both (the boot kit & the new mount) and try to get it from both angles or just try one at a time. My patience is getting pretty thin with this thing so I was trying to see if Dan (Ordie) got his fixed yet as well. Was that kit pretty self explanatory??? Come with instructions???|
|07-15-2013 10:20 PM|
|cleveland99||Jame I got the kit from stealership and it fixed my knock sound|
|07-15-2013 09:58 PM|
|Jame||Dan.....so how did things come out for you??? Wast it the TC mount or did you get the kit and try that??? Mines still banging around as usual. Wanted to know what you found. Let me know please.|
|06-27-2013 11:25 PM|
|OrdieCPO||thanks Water Dog!!|
|06-27-2013 09:38 PM|
The rest of us
Good luck floating the priority thing and fixing the Jeep.
|06-27-2013 09:18 PM|
|cleveland99||Novak may be in my future as well|
|06-27-2013 09:14 PM|
|OrdieCPO||all right...outstanding job troubleshooters I think we have found the issue(s). I am going to play around with the TJ this weekend. A great excuse to drink some beer and turn wrenches. Last weekend home before a trip to Australia...hopefully I can convince the wife that this knocking noise is very important and it is a priority!!|
|06-27-2013 04:10 PM|
Check your exhaust down tube clearance. Might be touching when cold and not after it expands quickly due to exhaust heat.
|06-27-2013 04:09 PM|
|n00g7||No problems on mine with a 1" BL and 1" MML... We'll see if that holds after the new tranny skid goes on.|
|06-27-2013 04:06 PM|
|06-27-2013 03:55 PM|
This is a bold statement so don't bite my head off.
Any time you use a body lift on a tj you should install a Novak shift cable. The cheap *ss relocation brackets never seem to work right and if you install a motor mount lift it will definitely make the symptoms worse. The knocking sound is the mechanical shift linkage binding and groaning when the drivetrain moves around on the rubber motor/trans mounts.
You can follow the tsb and replace a couple of wear items on the shift linkage but they will just wear out again and the problem will be back.
|06-27-2013 03:48 PM|
Never mind, I enlarged it and can see it better....that's the problem with 66 year old eyes, I think I need an upgrade..
|06-27-2013 03:44 PM|
|06-27-2013 03:12 PM|
Normally you don't run into such extreme issues like I had unless you go north of a 4 inch lift.
This is what your drive shaft will look like if it's rubbing. I was lucky and it only started rubbing on normal driving conditions..
|06-27-2013 02:12 PM|
|06-27-2013 02:10 PM|
|Tyr4nt||Great thread guys. I have some nuisance knocking on take-off from my bone stock suspension 00 Sahara. I checked out the DS's in the past to make sure nothing was hitting/scraping anything else. I'm going to inspect the trans mount sometime soon to verify if it's the prob. Subscribed.|
|06-27-2013 01:54 PM|
|cleveland99||Ok heres my update put the brass bushing thing on and the rubber boot from the kit and knock is gone hooray|
|06-27-2013 01:03 PM|
There was one mention of someones front ds rubbing, but I really don't think you'll have a problem with that, at least not sitting at ride height. If I were you, I would remove the skid and check the condition of the transmission mount (actually tc mount) first. If it looks like there's any issue at all with it (if you have any question about the way it looks, take a pic of it and post it), replace it before installing any more new parts. If that fixes your issue, return the unused parts that you've already purchased.
|06-27-2013 11:54 AM|
|cleveland99||I have read thread hence buying the kit but that was before you guys chimed in on the possible cause and I thought someone said there front ds was rubbing|
|06-27-2013 11:40 AM|
|06-27-2013 10:30 AM|
|cleveland99||If it is should I be able to see ds rub.marks|
|06-27-2013 09:31 AM|
Original Replacement Parts 52058551 - Transmission Mount for 97-06 Jeep® Wrangler TJ & Unlimited with 4.0L 6 Cylinder Engine & 97-02 Wrangler TJ with 2.5L 4 Cylinder Engine - Quadratec
Pull your skid plate and see if yours is cracked or torn, or in two pieces. Replace it if it is.
|06-27-2013 08:39 AM|
|cleveland99||Well I just installed it so we will see I looked at front ds no rubbing that I could see not sure where that mount is you guys r talking about so will see|
|This thread has more than 30 replies. Click here to review the whole thread.|