|09-05-2013 07:23 PM|
|LMT Rubi||My 2013 JKR had the TOB and a new clutch put in about 7,000 miles ago and it is happy and kicking. I get an occasional noise from the clutch when shifting from first to second gear but nothing crazy. I am sad that these days, our JKs have to deal with such BS.|
|09-05-2013 05:39 PM|
|CCShanafelt||That didn't fix it either! The dealer is requesting a new transmission now.|
|09-04-2013 09:35 PM|
|CCShanafelt||It was my snap rings!! They replaced the clutch and throw out bearing and then it still made the noise. So the part changers were told to check my transmission by Chrysler to see what may have broken. Well, the snap rings were off and clanging around in there and they have to replace them.|
|08-29-2013 02:31 PM|
My TOB just started making the noise.....1977 miles and they are ordering a new one plus the clutch kit. I only heard the "wrench on the underside of the motor" or "two marbles hitting" noise in 1st and 2nd, but the old mechanic heard it in all the gears.
I searched the internet high and low trying to find out what it was. Even thought it was the sway bar but after a bit of "camera strapped under the bumper" genius we ruled that out. I have never been so glad to find out something was wrong and it wasn't just in my head or a "typical jeep noise"!
|08-09-2013 12:59 AM|
|08-08-2013 08:39 PM|
|JusssssstiN||so my JKU is at 1800miles and I just went wheeling the other day for the first time and I believe my TOB is all jacked up now. Will dealership grant the warranty even if they see a little mud and dirt?|
|08-08-2013 08:26 PM|
Sorry on the late update but the dealership finally got back to me after two and a half weeks of having my Wrangler.
They were changing the driver's side head and figuring out what that noise on the clutch was.
It was in fact the throw out bearing. They are replacing it under warranty I'm at 26k miles.
|07-28-2013 09:58 AM|
|07-27-2013 06:30 PM|
Just because it's making noise doesn't mean it's going out soon. I'm just saying, while you are in there, replace it!
Jeep JK NSG-370 Throwout bearing comparison - YouTube
|07-27-2013 06:11 PM|
For any of you guys that got the TOB replaced at the dealership, did the service department try and give you a hard time about warranty work because they said te TOB is a wear item? I just want some "heads up" before I go. Even if they call the TOB a wear item, it shouldn't be acting up at my low mileage.
|07-27-2013 04:00 PM|
|BA93wrangler||mine does the same thing 93 yj with brand new clutch... should've replaced throw out bearing I guess but it seemed fine and I greased it up... live and learn.|
|07-27-2013 03:51 PM|
That noise is indicative of a bad Throw Out Bearing? Damn, that's worse than I thought. Thank you for the cheap Chinese transmission, Jeep. Sheesh.
I am going to Raush Creek on the 18th of August. I guess I will have to replace the TOB after all. I would not want it to give up the ghost in the middle of the trail.
Thanks for the intel., fellow 4-wheelers
|07-27-2013 02:34 PM|
|jmb6420||Get a good aftermarket TOB. Plenty of threads on here about the OEM TOB not being of the best quality.|
|07-27-2013 01:44 PM|
|Theairhead||Update: Mechanic replaced the tob said it was pretty shot. I'll let you know if the noise is gone when It gets picked up.|
|07-27-2013 01:26 PM|
|07-27-2013 12:15 PM|
|Theairhead||Same noise. Decided to replace the entire clutch since it'll be apart replacing the throw out bearing which I think is the culprit.|
|07-27-2013 12:12 PM|
|brian d||Mine was making the same noise. Took it to the dealer at around 8k miles. They replaced the "clutch kit" and throw out bearing. Noise went away. I'm at 12k miles now and guess what, it's back...|
|07-27-2013 12:06 PM|
|Espada||My clutch stated making the same noise just a couple of days ago. I've got around 4,400 miles on my JKR10A. It doesn't feel like anything is wrong beyond the annoying creaky sound. Still, you'd think we would at least have manual transmissions worked out by now. I'll just monitor the condition, if it gets worse then I'll take it in. I don't want to waste time when I could be driving.|
|07-18-2013 12:48 PM|
|bcj366||Ok I started looking at it when I got home and its a hydrolic clutch and looks like it runs off the brake fluid. The hose runs down to a black cylinder that I believe is what works the clutch. It seems like the noise is coming from there and might just need some grease. I'm going to take it apart this weekend and see if I can fix it. Anyone have any ideas as to what kind of grease I would want to use? I have no experiance working with hydrolic clutchs so I have no idea what I'm getting my self into yet|
|07-17-2013 04:20 PM|
|07-17-2013 04:06 PM|
|bcj366||Coll thanks a ton!!! I'll be looking forward to any info you get on it. Mine does it with the engine off too but not in the morning for some reason. Maybe it just likes the morning idk. Driving me nuts tho. I'm gonna take a look at it with a co-worker today and see I we can figure out where its coming from at least, then go from there.|
|07-17-2013 03:55 PM|
I have an appointment to get my head replaced next Monday and this noise issue will be addressed according to my service guy. Ill keep you updated.
|07-17-2013 03:10 PM|
|07-17-2013 10:43 AM|
|bcj366||Something to add is that this morning I didn't hear it at all but have for the past couple days. It may have something to do with it being cold at that point since it seems to show up after driving for a bit. Problem is I work less then 5 minutes from my house so I'll have to test that after work when I can drive for a bit and heat everything up.|
|07-17-2013 10:41 AM|
Clutch noise need help
Ok guys tho I have only started contributing on this forum recently I have been a proud jeep owner for 15+ years and am used to the noises that come with these vehicals. That being said I have some new noise coming from my JK that is not normal. Hard to explain but I'll do the best I can here.
When I push the clutch in it almost sounds like a creaky door and its a little less noticable when releasing the clutch. And I just noticed yesterday that in 3rd gear from 3k rpms till about 5k it makes that same noise with the clutch fully engaged and during accelerating. Didn't think to not try accelerating in 3rd at those rpms till just now to see if it continues but my guess from the sound of it it will, so I don't think that accelerating or not will make the difference as much as being in that rpm range in 3rd and seems like its only 3rd. I guessing something got knocked loose during my last off road trip but wanted to check here and see if anyone has any suggestions??? Any help is much appreciated!