|07-19-2013 03:01 PM|
|jokerchief462||No they stay in place when the bolts are removed. It would be real bad to lose your nuts!!!|
|07-19-2013 01:33 PM|
|Jprather823||Ok my main concern is if I unscrew bolts would I lose my nuts underneath but it sounds like they are attached|
|07-19-2013 01:01 PM|
|jokerchief462||Yes it is under the Jeep called nutserts. Nuts that are attached underneath. Should be noticeable by the pattern. Soak them with PB Blaster for a few days and see what happens sometimes you just get lucky.|
|07-19-2013 11:25 AM|
|Jprather823||It's not under car is it?|
|07-19-2013 11:16 AM|
|Lanco||you can see them from the bottom. get in there with a flashlight|
|07-19-2013 09:36 AM|
|Jprather823||So how do I get to the nuts?|
|07-19-2013 09:18 AM|
they do have nuts underneath. my were rusted solid. i tried removing them without properly soaking them in penetrating oil.. i snapped two bolts off (it was on of the first things i did after getting my jeep).
needless to say the brackets are now welded on. worked out pretty well. i now have anchors to strap cargo to since i never keep my rear seat in.
moral of the story: soak them bolts
|07-19-2013 09:01 AM|
Seat bracket removal
I'm looking at taking my seats out so I can work on my flooring. Does anyone know if the screws from the bracket that bolt to floorboard have nuts underneath or can I just unscrew them. I've looked underneath and don't see bc there may be a plate over where the screw in.