|07-22-2013 10:58 PM|
|07-22-2013 10:40 PM|
|RednekYJ||No offense, I hate northern jersey. Aside from Hoboken.|
|07-22-2013 08:43 PM|
|ChaiseYJ||I live in Wanaque nj. Passaic county|
|07-22-2013 05:31 PM|
|Jeeptrd||Chaise I'm in the Edison area in nj if you need a hand with any of this let me know|
|07-22-2013 04:08 PM|
Chaise, Where do you live? I'm sure someone near you would be willing to help you w/ these issues. I know I would just for safety sake....
X2 on this thing having been lifted and brought back down, but if its this dangerous on the return can you imagine what the lifted version looked like?
|07-22-2013 04:04 PM|
lol that's what we been sayin...
|07-22-2013 01:23 PM|
|wasomma||Dude wtf is going on with your rear end!!!|
|07-22-2013 01:23 PM|
87 95 Jeep Wrangler Rear Back U Bolt Spring Plate Set Dana 35 Axle YJ | eBay
That is the part you should have, along with some new U Bolts just to be safe. It looks like someone stuck home made spacers on the bottom of yours for some stupid reason.
|07-22-2013 01:22 PM|
|07-22-2013 11:46 AM|
|07-22-2013 10:51 AM|
I know those rear blocks have been mentioned, but those are what concern me the most in this whole setup. Yes, the steering stabilizer is in a totally screwy location, but what's really dangerous on this rig is that rear end.
The spring packs have what is called a centering pin in the middle of them. They locate your spring pack on the perch of the axle. Then your u-bolt plate has a hole in the middle of it that the pin comes through. That box tube is just flat out dangerous. Before I touched another thing on that Jeep, I would get that fixed first.
|07-22-2013 10:33 AM|
|amerdt4||You "should" be able to do it by hand . Nothing a breaker bar can't take care of . If you don't have a breaker bar , a pipe on the end of a socket wrench or wrench can do the job . The only bolts I have ever NEEDED an impact gun for is the main eye bolts ,and even then I ended up cutting them . An investment of PB blaster is always a smart choice . Happy wrenching !|
|07-22-2013 10:00 AM|
|ChaiseYJ||Can I use just plain old tools to move that steering shock or do I need the air powered tools|
|07-22-2013 09:28 AM|
|amerdt4||That bracket circled in red looks like the remnants of an after market steering stabilizer(take it off) . My guess is that this was lifted at some point but brought back down for some reason . First thing get rid of those blocks and get some shorter u-bolts . The steering stabilizer is now bolted to the front track bar bracket . That needs to come out and be bolted to the hole in front of the passenger side spring perch .|
|07-22-2013 09:17 AM|
|07-22-2013 09:08 AM|
You are missing your swaybar. You also have your rear trackbar in which will make it ride pretty rough in the rear. Your breather hose for the axle also looks like it is hanging.
That swaybar has a lot to do with it I bet. You can drive without one, but it depends on what type of lift you have. I cant for example unless I am going a short distance. Otherwise when I hit a big pothole I have to hang on a correct it quick. If your springs are soft and you have no swaybar it will feel like you are going to lose control over 40mph.
Also get that front end up off the ground and start pulling on everything. You will find if anything is loose when is starts making a knocking noise usually.
|07-22-2013 08:59 AM|
Yeah.... that's just wrong
|07-21-2013 05:48 PM|
Looks like the stabilizer is boltet to the axle where the front track bar should be. This is how it should be
|07-21-2013 05:32 PM|
|RednekYJ||Steering stabilizer is not correct. It should be parallel with the tie rod. You have more than a few issues there. Get some new u bolts, and fix that stabilizer. Look for play in the front end by having someone cycle the steering while you are watching it. Also jack up the front and try to wiggle the tire at top and bottom and left and right. Play at 3&9 indicates worn tierod ends. 12&6 would be ball joints.|
|07-21-2013 05:17 PM|
|07-21-2013 02:05 AM|
You can buy new U bolts at almost any auto parts store.
But if those front springs are lift springs, and the rears are stock, well, then you're going to be sitting funny and un drivable.
|07-21-2013 12:49 AM|
For the death wobble, check all of your tie rod and drag link ends. A steering stabilizer or shock will not fix your problem.
|07-21-2013 12:22 AM|
check out this video, I get death wobble when i hit a pothole on only 1 side of the vehicle and this video certainly is informative on what to look for to correct the issue. It isnt the holy grail but it is good.
|07-21-2013 12:12 AM|
|07-20-2013 11:53 PM|
|07-20-2013 11:49 PM|
|07-20-2013 11:28 PM|
|ChaiseYJ||So I'm thinking this is what I do. Get a wheel balance to see if that will help I definitely need new shocks. But idk what I have to buy. Can I buy just the shocks . Do u guys have any recommendations cheap. Maybe I should get new leaf springs but my biggest concern right now is there sever death wobble|
|07-20-2013 09:04 PM|
|indirocz28||Aaaannnnd thats why I bought a stock one. Lol!!|
|07-20-2013 08:42 PM|
|robmcbee||wow.... and I thought my P.O. had no idea what he was doing.... with that setup those blocks are useless and providing NO lift... Unfortunate for us as used jeep owners this is the kind of thing we run into. Good luck and the only way to learn is to ask questions and get your hands dirty.|
|07-20-2013 07:07 PM|
Looks like they put lift springs on the front, and kept stock springs in the rear, thinking " hey, I'll throw some blocks in there and call it good".
I hope you don't have much in it. Plan on spending a bit of $ to fix stuff the right way.
If you have any questions, this is a great forum to ask.
|This thread has more than 30 replies. Click here to review the whole thread.|