|07-28-2013 08:46 PM|
|BradysTJ||Rancho 3.5" sport lift|
|07-28-2013 08:37 PM|
|Neil F.||What lift kit did you install?|
|07-28-2013 08:34 PM|
|BradysTJ||I'm just saying my kit came with the bracket for the rear I figured it would make it right , guess I'll be buying adjustables .I had planned to buy one for the front I just figured the back would be alright with the supplied bracket.|
|07-28-2013 08:20 PM|
Generic one-relocation-bracket-fits-all-suspension-lift-heights are not effective at recentering the rear axle for all possible suspension lift heights.
Don't bother trying to find such brackets for the front axle, they don't make them... or at least the few that have been sold create other problems & aren't a good thing to install.
You can get away with the right model relocation bracket for the rear but for the front, you really need to pony up for an adjustable length track bar to get the axle properly centered.
|07-28-2013 08:14 PM|
|07-28-2013 08:07 PM|
|reissigree||You have to adjust it. Disconnect the track bar and let your TJ sit on its own. Adjust track bar and reconnect. Done.|
|07-28-2013 03:59 PM|
|07-28-2013 02:29 PM|
What's the point?
So I have the lift installed in the rear of my TJ and just let it down off the jackstands. I'm checking it out and the passenger side tire is sticking out an inch further than the driver side. So what is the point of the track bar relocation bracket if it's not going to be centered?