|09-11-2013 07:36 AM|
|09-10-2013 11:02 PM|
|09-10-2013 01:48 PM|
3.8L, automatic, 35s, 4 door and I was still disappointed when I switched from 4.10s to 5.38s. Streetability didn't improve as much as I hoped, felt like I just got back my overdrive and 4:10 OD off drove better than 5.38 OD on around town.
|09-10-2013 09:11 AM|
|09-10-2013 08:49 AM|
|09-10-2013 07:50 AM|
|Nickdoesabodygood||I went from an '08 with 3.21 to 4.11. The difference was dramatic, its like a totally different vehicle. RPM's are definitely higher than before but now I can actually use 6th gear on the highway.|
|09-10-2013 07:38 AM|
|TreyJK||I have a 08 auto with 35"s but it's also my daily driver. Would 5.33 gear ratio be too much for toll road speeds?|
|08-03-2013 08:00 AM|
|shrwud96||I used www.compnine.com for my build sheet. Worked great and everything was accurate. Click on the Try free demo.|
|08-03-2013 07:49 AM|
|08-02-2013 10:57 AM|
Re-gear doesn’t give you more power as it has nothing to do with the engine. It does make the driveability 100% better. Lowere RPM, better MPG, less doggy at accel, so on…A 3.8L with manual would benefit from 4.88 gears for 35’s.
|08-02-2013 10:33 AM|
|08-02-2013 12:34 AM|
|david.w.johnson||What were the improvements with the gear change? More power? Pick up from a stop? Pick up at speeds? Mileage?|
|08-01-2013 10:54 PM|
If you log on to the Jeep website you can request a "build sheet" with your V.I.N. They will e-mail you the build sheet within a day.
I have a 2010 JKU automatic with 35's. I went with 5.13 gears. Changing the gears takes some tech experience. My advise would be to take it to a trustworthy shop who does gears.
|08-01-2013 09:51 PM|
|ResQJK||It's a manual. Did you do your own work?|
|07-31-2013 11:35 PM|
If you have a manual you can have 3.21 or 3.73. The 3.73 was an upgrade option. If you have a automatic tranny then you have a 3.73.
I have 4.88's in mine and think they work great with my 35's
|07-31-2013 11:18 PM|
Regearing...Looking for advice
I have an '08 X, where can I find on the vehicle what the gear ratio is? I believe it may have 3:21s. I am running 315 MTZs, so what would a more appropriate ratio be? Finally, how difficult is the process of changing out the gears? Thanks in advance for any help you can give me!