|08-04-2013 12:04 PM|
It's really not a height issue, the extra width can rub inside under extreme articulation and with the fender lip under heavy compression. That said I put 285/70/17 duratracs on a 5" backspace and over the road there's no issue. Just to be safe, I am installing a teraflex leveling ( coil ) kit this week for a little more clearance up front. It is probably a good idea to include a basic lift and/or spacers in your upgrade budget.
Do it right...or do it twice.
|08-04-2013 09:29 AM|
|Misiu||Wonder if the extra ".5" height of the 10th Anniv would help? I've been pondering the same tire switch and hope that my extra ride height will help.|
|08-04-2013 09:26 AM|
|Alvarado||Here are mine. Wheel back spacing is important also|
|08-04-2013 08:40 AM|
I have 285/70 Nittos on the stock Rubicon wheels (no spacers) and have no clearance problems, front or back, including full lock turn at the sway bars.
We had a big discussion on this a while back and one of the participants (stock wheels with 285/70 Duratracks) did have a slight sway bar rub on one side (but not the other) at full lock. Im my opinion that's a track bar adjustment issue.
If you go with aftermarket wheels with the standard 4.5" back space, then you move the wheels outboard by 2 inches, and while increasing your inside clearances, you place the tire tread under the fender lip, reducing your clearance there.
I had that setup on a previous JK and I did have very slight contact with the lip under a full "to the stops" compression in the rear. Very slight, but enough to know I did it. That could be eliminated with no more than a half inch spacer on the springs.
So, the answer is... yes you should be able to use those tires without any problems that can't be very easily fixed.
|08-04-2013 07:48 AM|
You are correct, that is a very nice tool.
Thanks for sharing.
|08-04-2013 07:46 AM|
|PeteQuad||That tool rules, thanks!|
|08-04-2013 06:59 AM|
|08-04-2013 06:57 AM|
|08-04-2013 06:48 AM|
New tires on stock ride height
All I want to know is will a 285/70R17 fit on my stock ride hight with no rubbing. Anyone have the answer?