|08-06-2013 12:33 AM|
Put the puller on and put a hose clamp around the legs to help hold them in. The puller may pop off a few times but with some determination you usually can get it off. I have had more than 1 of them break on me. Just part of life some times. Cant let it get you down.
Best of luck
|08-05-2013 03:43 AM|
|munizhcw||I replaced mine not too long ago and couldnt get it timed correctly.|
|08-05-2013 03:02 AM|
Crap! Brole off piece of damper pulley.........
Yep! Chrysler 3 legged pulley and one of the arms broke off a piece of the pulley lip. Must not have been on all the way or something. Now I'm stuck.......and have to pull a rabbit out of my hat to get the harmonic damper pulley off the crank shaft.
|08-04-2013 03:49 PM|
|kawzak||You can watch a video 20 x and you will still need a manual to know what bolt torque, pictures refering to pully mark alignment, etc. A Haynes manual is only $17.00 from 4 wheel parts online, or $ 26.00 at a parts store- and you can refer to it for anything else to be fixed in the future. You may get lucky and find one for your Jeep at a used book store.|
|08-04-2013 03:39 PM|
Best to get a account at www.alldatadiy.com. It is cheap, very good info. It is what a lot of shops use for repair info. It is one of the best bumper to bumper aftermarket service programs available. Online programs like this are far superior to paper manuals because they are constantly updated. Complete step by step instructions for most repairs with photos and diagrams. This is the only system that I know of that lets you purchase the info foe 1 vehicle. Well worth the money. In my opinion anyone performing there own repairs needs this. At less than what $20 per year, how can you go wrong.
Best of luck
ASE Master Auto Tech
|08-04-2013 02:08 PM|
Wow! Thanks man, I bought a manual (Haynes) and your info blows away the Haynes. Great help and I hope to return the favor someday.
|08-03-2013 03:24 PM|
Havent done one in a Jeep yet, but heres the info from the service manual if you wish to download it. Saved it as a microsoft .xps
03 Timing belt
|08-03-2013 02:27 PM|
Sometimes you can find a video walk-through on YouTube. I watched a video a couple of days ago on how to change the rear seal on a 4.0L engine. Do a search and see what you can find. Good Luck.
Here's a link to a Toyota Camry video. Basic concepts only. You would still need a wrangler shop manual.
|08-03-2013 01:47 PM|
|Slater451||I replaced mine not too long ago and couldnt get it timed correctly. Had to have it fixed at the dealer. 200 bucks later she was good as new|
|08-03-2013 01:44 PM|
That's a good price. They have a kit that replaces the tensioners and water pump. I'm thinking I might do that.
I do need a service manual. My nephew can walk me through any issues by pic's and phone though. And I've rebuilt motorcycles and a 4 banger Scout many years ago.
Just looking for someone who has gone through the same situation.
|08-03-2013 06:41 AM|
|Atthehop||You need a factory service manual.|
|08-02-2013 11:45 PM|
Wish I could help. My 2.4L 2004 timing belt went bad a while back.
I thought about doing mine but I've never did one and it looked too big a pain for me.
I ended up buying everything at Advance Discount and had a shop install it.
Total price for everything was $365.
I'm sure someone on here has the info you're looking for. Seems like they always do.
|08-02-2013 11:37 PM|
Help!! Need timing belt instructions, for 2.4L 2003
I'm going to try to replace my timing belt. Anyone know where I can find good info? I've found enuf bad stuff already. Autozone,yuk!
2003 2.4L timing belt....etc.