|08-19-2013 06:19 PM|
|08-19-2013 10:11 AM|
24-12 oz. ammo case, mounted in my 92 YJ.
|08-18-2013 10:58 PM|
|dguire792||Thanks for the idea these are awesome defiantly going to make them when I get my hands on some!!|
|08-18-2013 04:22 PM|
|87 Florida YJ||Just 'paying it forward' for all the help and ideas I have received from this Forum. Everything my jeep is today I owe to the Forum members.|
|08-18-2013 04:06 PM|
|08-18-2013 03:53 PM|
|87 Florida YJ||
No cutting at all.
8 nuts, bolts washers
I took the top of the can off. Then I removed one of the two hinges that snap the can closed. Just pinch the two sides to remove. You don't need it and that's the end that gets the hinge. Next i think I bent the side edges of the top out a tad with a vise grips. You want it to open easily. With the top off place the hinge on the inside of the can, mark the 4 holes, drill, and attach the hinge nut side in. Last step is marking the holes for the lid. I elevated the top of the hinge with tape. I don't know how to say it. It's now taped up so the top of the hinge isn't just hanging. Anyway, carefully prop the top at the hinged end, because its up you can get your arm in and mark the position of only one hole. Drill that one hole. Bolt the top on through the one hole and close the top. The hinge is now in perfect position inside. Open and close it a couple of times for fit. Open the lid, drill the three holes, bolt the last three and you're done. Hinge is on the inside, paint the four bolts green and they disappear.
Read it a couple of times and it will make sense. Probably took me longer to type your reply than to do the job.
|08-18-2013 02:34 PM|
|08-05-2013 09:05 PM|
|87 Florida YJ||Ammo cans are just soooooooo jeep. Gotta love 'em|
|08-05-2013 08:40 PM|
|williamyj||Did the same thing. Love it. Get lots of compliments on it too|
|08-05-2013 07:31 PM|
|87 Florida YJ||You kidding? I think it came out grand. I like the size of that can.|
|08-05-2013 06:58 PM|
I thought I'd throw my .02 in. I bought this ammo can from Cabela's for $20 and mounted it over the weekend. It came out pretty good.
|07-18-2013 07:19 PM|
Look at my build thread for how I mounted my ammo can console -
|07-18-2013 04:44 PM|
|87 Florida YJ||Thanks guys. I'm positive you are going to enjoy the finished product.|
|07-18-2013 04:42 PM|
|CaliWrangler||Awesome job... I'm going to be doing this for my center console as well... Yours turned out great!|
|07-18-2013 12:20 PM|
|1987Wrangler YJ||Alright thanks! this is going to be my weekend project|
|07-18-2013 11:31 AM|
|87 Florida YJ|
|07-18-2013 11:28 AM|
|87 Florida YJ|
|07-18-2013 11:11 AM|
|07-18-2013 10:40 AM|
|1987Wrangler YJ||That is so sick! how did you mount the one for the center console? and where can I get these from??|
|07-17-2013 03:23 PM|
|Wranglin4Life||Very nicely done. Love me some ammo cans|
|07-17-2013 01:24 PM|
|07-16-2013 10:22 PM|
|Carlsbad0331||And if you can get the rocket crates (the brown metal ones) they fit perfectly behind the rear seat in a YJ!|
|07-16-2013 10:03 PM|
|87 Florida YJ||Here's the rear|
|07-16-2013 10:02 PM|
|87 Florida YJ||
40 mm ammo cans
These things are terrific. My YJ is a military replica so they naturally work for me but if I had any year or style I think I still would be using them. First of all they hold tons of your stuff. I have two in the rear. One holds all of my tools and bottle jack and the other holds my fishing equipment perfectly. Then I modified a third into my console and I could not be happier with the result. The can is a perfect size to hold my CD's and any other junk I need with me. Nobody asked me but I enjoy these so much I wanted to pass the info on to the rest of the forum.