|12-11-2014 08:47 PM|
|TrailViolater||Thank you, I have a friend at my local Jeep dealer. I'll see what he can do.|
|12-11-2014 06:39 PM|
|12-11-2014 12:31 PM|
|12-11-2014 06:12 AM|
^ Maybe try it again? The instructions for both the horn and lights is the same so maybe it will turn the lights off next time - or the horn will come back on.... not sure if there's a mistake in the instructions. Experiment and let us know?
|12-09-2014 02:06 PM|
Just tried it using the key fob on my 2011. By pressing the unlock button for 4-10 seconds, then pressing the lock, then finally releasing them: Horn stopped sounding on lock (another annoyance removed
Still unable to turn the head lights off.
|09-06-2013 01:49 AM|
|Jstraw||Yes, I,would like a concrete answer on this subject...|
|09-05-2013 08:43 PM|
|08-22-2013 09:59 AM|
|Area 51||I have tried 8 times on my 2013 JKUS and cant get it to work! Do you do this while in the Jeep with key in or standing outside?|
|08-22-2013 09:08 AM|
|woansleftpeg||You might be able to do it with a Flashcal, I know there is some headlamp stuff you can do.|
|08-22-2013 08:58 AM|
[QUOTE="Up Hill Bill;4083925"]Forget it, this doesn't work, even though the 2012 owners manual sure suggests it does.... It just keeps the interior lights from coming on, not the headlights.....Bummer.
Did it a week ago on my 12 and it's working like a charm. No more headlights when I unlock.
|08-17-2013 06:10 PM|
|Up Hill Bill||
I do have EVIC and have illuminated approach set to 30 seconds. I can turn illuminated approach completely off with EVIC though.
|08-17-2013 02:32 AM|
|Lusus_Naturae||It'll work - you may have to try multiple times though - kind of like how you can turn of the seatbelt chime too, but it takes multiple tried to get it to take.|
|08-16-2013 09:57 AM|
|08-16-2013 09:02 AM|
OP: I encountered the same issue this summer when on our 8 day family camping trip around Cape Breton N.S. I thought I could defeat this with the EVIC, but could not. only the interior would stay off.
I will try UpHillBill's recommendation with the light stalk dimmer settings.
|08-16-2013 02:33 AM|
|kcookuscg||If worse comes to work just use the key|
|08-15-2013 11:47 PM|
|Up Hill Bill||
Forget it, this doesn't work, even though the 2012 owners manual sure suggests it does.... It just keeps the interior lights from coming on, not the headlights.....Bummer.
Turn the dash light dimmer control on the light stalk all the way to the "bottom" to turn all interior lights off. That is supposed to kill the headlights on function, and all the other lights that usually come on with "illuminated entry"
|08-15-2013 11:35 PM|
i hated my headlights turning on every time i used the keyless entry...
i had mine on my 2013 unlimited sport deactivated with a "starscan" i think.. .... not sure of the correct term for the device the dealership used... but once they disabled that i had to re-enable my parking light flashing which was disabled by default when they disabled my headlights from turning on with unlock.
note... i do not have evic.
To Turn Off Flash Lights With Lock -25 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
This feature will cause the turn signal lights to flash when
the doors are locked or unlocked with the RKE transmitter.
This feature can be turned on or turned off. To change
the current setting, proceed as follows:
• For vehicles equipped with the EVIC, refer to “Electronic
Vehicle Information Center (EVIC)/Personal
Settings (Customer-Programmable Features)” in “Understanding
Your Instrument Panel” for further information.
• For vehicles NOT equipped with the EVIC, perform the
1. Press the RKE transmitter UNLOCK button for 4 to
2. While the UNLOCK button is pressed, (after four
seconds) press the RKE transmitter LOCK button. Release
3. Test the “Flash Lights With Lock” feature outside of
the vehicle by pressing the RKE transmitter LOCK button
with the ignition in the LOCK position and the key
NOTE: Pressing the RKE transmitter LOCK button
while you are in the vehicle will activate the Vehicle
Security Alarm. Opening a door with the Vehicle Security
Alarm activated will cause the alarm to sound. Press the
RKE transmitter UNLOCK button to deactivate the Vehicle
The “Flash Lights With Lock” feature can be reactivated
by repeating this procedure.
|08-15-2013 09:37 PM|
|spacelord||Thanks everybody! This has been bugging me since I got my 2012.|
|08-15-2013 05:14 PM|
Yes, if you have EVIC, you can choose Headlamp Off Delay (how long the headlamps remain on after exiting your Jeep, you can choose headlamps with wipers (if you have Auto Headlights) and you can select to have Illumination Approach (which is what you're asking about.
You can set Illumination Approach to either "off", 30, 60 or 90 seconds, which will turn your headlights on for that period of time when you unlock your Jeep with your remote transimitter.
Not sure if you can disable or not if you don't have EVIC.
To do this, Enter your "Personal Settings" menu and select the "Illumin. Approach" to toggle through and select the option of your choice.
|08-15-2013 05:10 PM|
|08-15-2013 05:03 PM|
|County98||My Rubi has EVIC and I think it's in the settings menu? Not sure, but I thought I saw it in there...|
|08-15-2013 04:59 PM|
Headlights when unlocking
I've seen several posts here that said the dealer can deactivate the feature that turns on the headlights when you unlock the doors. Yesterday my dealer told me that they can't do that.
Has anyone actually had this feature deactivated? If so, what dealer did it for you? Sometimes "we can't do that" means "we don't know how to do that".
I camp a lot, and I really don't like lighting up a dark campground if I have to unlock my doors after dark.