|07-29-2009 04:10 PM|
|07-29-2009 02:41 PM|
Jerry figured it out. The mounts on the axle are moved from the stock location to closer to the tire and then up. FML
1- buy new shocks that are shorter
2- move the mounts back to the stock location.
I am beyond pissed right now.
|07-29-2009 02:30 PM|
|Jerry Bransford||Nope, the TJ D44 uses the same length shocks as the TJ D35c does. I swapped from a D35c to a D44 and all of those types of dimensions were the same. Only the D44's pinion shaft protrudes out further, everything else exterior-wise is identical.|
|07-29-2009 01:41 PM|
|nvr-enough||sounds like you should have swapped in some rockwells.....|
|07-29-2009 01:35 PM|
Do dana 44's require a shorter shock then the dana 35? The rear shock on the truck right now only has about 2in of the cylinder showing. That is causing my terrible ride. IF I hit any kind of bump it toss my all over the place. So I am going to have to get shorter shocks but has anybody else had this issue?