|08-22-2013 11:35 AM|
1997-2001 Jeep Wrangler Throttle Position Sensor for L6 4.0L
VISIT US HERE FOR GREAT PRICES 1997-2001 Jeep Wrangler Throttle Position Sensor for L6 4.0L
FREE SHIPPING IN THE LOWER 48 STATES!!!
This throttle position sensor or TPS switch is a new, aftermarket part. It is mounted to the throttle body and is used to monitor the position of the throttle. Once the position is determined, it sends a signal to the engine control unit (ECU) as an input to its control system. If the TPS switch goes bad this could cause poor/erratic running engine with little or no power. Many times your check engine light might be activated by a bad TPS switch. If a bad throttle position sensor is your problem, why not fix it now with this new replacement.
Throttle position sensor (TPS) switch specifications:
Mounts to throttle body
Replaces dealer part numbers:4874371, 4874371AC
Built to strict quality control standards
100% electrically tested prior to leaving the factory
Your Engine size can usually be found on a white sticker in the engine compartment near the radiator. If needed, your VIN code is the 8th digit of your vehicles Vehicle Identification number. The VIN can be found on the bottom drivers side corner of the windshield and on your registration. Some refer to the VIN code as the Serial Number.
1 Year Warranty
This item is backed by a 1 Year Manufacturers Warranty. In the event this item should fail during intended use, we will replace the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
This part replaces:
OE #: 4874371, 4874371AC
STANDARD MOTOR PRODUCTS #: TH189T