|08-25-2009 01:18 PM|
|08-25-2009 12:49 PM|
|Rawkon||I used the Lucas trans additive with good results. 150inch lbs is basically hand tight if you dont have an inch lbs torque wrench.|
|08-25-2009 12:27 PM|
|WTS||Looks like people have mixed results for the Lucas additives...the guy at the parts store swore by it. Guess I get to return it! Thanks Jerry for the advice.|
|08-25-2009 12:12 PM|
crap...so I return the gasket kit and go back to the jeep dealer to get the mopar gasket....
I perhaps didn't phrase it quite right. I looked up the torque to tighten the tranny pan bolts. (Tighten bolts to 17 N·m (150 in. lbs.) torque.)
|08-25-2009 12:00 PM|
|Jerry Bransford||The Mopar gasket is WELL worth it, get it. I would not add the Lucas additive. I didn't understand your trivia question though.|
|08-25-2009 11:55 AM|
Trivia Question: What part of normal service of the 32RH is tightened to...
Tighten bolts to 17 N·m (150 in. lbs.) torque.
Gonna change the tranny fluid again. I am still having a slight (every once in awhile shifting issue). Gonna do another change and put in Lucas tranny additive.
Is there a reason to use the mopar plastic gasket for 18 bucks or a regular rubber gasket on the tranny pan?