|09-07-2013 11:37 PM|
|Parsonsm||Thanks all, this will be very helpful.|
|09-06-2013 10:29 AM|
Stock D35 swaybar on Rubi D44. Currie 3" extended sway bar links. They bolt to the frame just above and behind stock upper control arm mount.
Sorry for the crappy cell phone pics!
|09-06-2013 10:16 AM|
|Imped||Bar brackets bolt to existing mounts that are welded to the axle housing tubes. The links simply attach the sway bar to the frame. If the links don't come with the factory upper and lower bolts, you'll want to go get some from the dealer.|
|09-06-2013 09:47 AM|
|Parsonsm||Sorry, just saw where the bar connects to the axle.|
|09-06-2013 09:44 AM|
|Parsonsm||So the brackets that bolt to the frame connect to the underside of the frame correct? Would love to see on in place if anyone has some good pics. Thanks for all the help.|
|09-06-2013 09:43 AM|
|Parsonsm||Great thanks. Yea, I think I am going to need longer links as I have a good amount of lift.|
|09-06-2013 12:58 AM|
|09-06-2013 12:34 AM|
|Sccafire||With you lift you may need to get longer swaybar links.|
|09-06-2013 12:06 AM|
Installing an antiswaybar is nothing more than bolting it into place. You need a pair of rear brackets to hold it to the rear axle, swaybar links to connect between the sides of the axle & the swaybar ends, and the nuts & bolts. Once you see it and find the mounting bolt holes on the axle, on either side of the pumpkin, mounting it will be a piece of cake.
Here's the whole thing used from eBay...
The two center brackets bolt to the axle, the two rusty brown-looking links bolt to the antiswaybar bolt holes on the axle. 8 bolts, four nuts.
|09-05-2013 11:55 PM|
|Parsonsm||Ok I found a local guy who has a stock one that will work so I am thinking on that. Can't find much on how to install it though. Any help is appreciated.|
|09-05-2013 01:10 PM|
When I swapped out my D35 for a Rubi D44, I just moved my stock rear swaybar over to the d44.
All the mounting points were same.
I am not sure what other model Jeep sway bars are interchangeable. Maybe something to research and find at a wrecking yard for a quick fix.
|09-05-2013 10:58 AM|
|09-05-2013 10:31 AM|
I may have to get the rear AR installed sometime though...
|09-05-2013 09:14 AM|
Did you see my rear AR? I built the frame mounts, bent the arms, etc. That was not easy. Putting the bolt-on AR onto a normal TJ is cake.
|09-05-2013 09:06 AM|
|09-05-2013 08:54 AM|
|lovemachine||How difficult is installing the Currie rear AR?|
|09-05-2013 08:21 AM|
|pyrilampes||Lower your standards and get a fat chick. Have her sit either on the left or right in the back (out of sight) that will stabilize the jeep and take out some of the vehicle roll.|
|09-05-2013 08:13 AM|
|PStov98TJ||It is sort of a safety issue if you like to drive like a maniac. Just know you've got a sway bar missing and drive accordingly until you can get one on there.|
|09-05-2013 08:11 AM|
|Parsonsm||Just confirmed that there is no RSB or links down there. Looks like that is my next project. Just hope this is not too hard of an install, does not look to be. Any tips appreciated. Man, I have had this thing up on the interstate a few times, hope it has not been too much of a safety issue.|
|09-05-2013 07:53 AM|
He's gonna say, "I did it for more flex man."
And if he does, he doesn't know what he's talking about.
|09-05-2013 07:45 AM|
|Parsonsm||Ok, heading out and under the jeep this morning to see if one is there. If not, going to contact the PO and get the history on why it was removed.|
|09-05-2013 07:09 AM|
It's very, very friendly on and off the road.
|09-05-2013 12:47 AM|
|09-04-2013 11:44 PM|
|Endoftheroad4x4||Tire spacers and a big fat tire|
|09-04-2013 10:20 PM|
|Parsonsm||Best place to buy|
|09-04-2013 10:18 PM|
|dahreno||Your Jeep should have had one from the factory . It's not something that people add to that model Jeep , you should have it already|
|09-04-2013 10:12 PM|
|09-04-2013 09:56 PM|
|Parsonsm||Any recommendations on type, brand etc. I will have to go out and look a big more in the morning. Thanks for the input.|
|09-04-2013 09:05 PM|
|TJDave||That's your body roll problem. I would re install one before messing with a bunch of other stuff.|
|09-04-2013 09:04 PM|
|This thread has more than 30 replies. Click here to review the whole thread.|