|08-27-2009 09:47 PM|
|distortedtj||Paint is cheap.|
|08-27-2009 09:43 PM|
I'm with you . . . hate the yellow!!! I think you'd be fine with the RE Monotubes . . . might be a bit stiffer making for a bumpier ride on-road than the OME, but it's a Jeep not a caddy!
|08-27-2009 07:49 PM|
|mudslinger150||^ good to know, im really excited to get this RE kit. thanks for all the input! Should i go with the RE Monotubes or with the OME shocks...i wish OME werent yellow it's just an eye sore|
|08-27-2009 06:35 PM|
RE is a better manufacturer and I've personally had good luck with them standing behind their products and providing good service. The kit you have listed might be a good place to start, but is far from complete. The cool thing about this kit is you won't be wasting a bunch of money on crap like those fixed LCAs that came with the other kit that you'll just get pissed about and end up trashing like I did my Full Craption arms that had the same basic design. The RE Springs are good quality and that's pretty much what this kit gives you along with bumpstops and the little stuff. If you don't have the dough to do it all up front, this will get you by for a little while and then you can add a quality set of Upper and Lower Arms from a company like Currie or Rokmen (I wouldn't recommend RE Arms), the SYE and CV DS, adjustable track bars, etc. You'll only end up trashing a couple of links, the TC spacer, and the TB Bracket with this kit as you upgrade.
|08-27-2009 04:55 PM|
|4point||You bet Con, glad to help.|
|08-27-2009 04:51 PM|
|Cons_Table||Thats what I thought you meant by the joint, was just making sure. Thanks for the info 4point...I will have to keep this in mind in the future|
|08-27-2009 04:26 PM|
These are what I switched to.
Rokmen - ROKMEN Adjustable Control Arms
Yes the bushings can be replaced, but it does not fix the flex problem.
|08-27-2009 04:21 PM|
Do u have an example of this joint on the control arm, so I can see more of what you are talking about?
And I'm assuming you can get replacement rubber bushings in place of the poly?
|08-27-2009 04:01 PM|
|4point||Having fixed CA's and poly bushings being more rigid than rubber make for a stiffer ride and no flex when off road. Any flex you do get will be at the sacrifice of the bushings and CA brackets. My bushings wore out after 6 months with occasional mild wheeling. The CA's with a joint of any kind on one end or both will allow flex and alleviate these stresses.|
|08-27-2009 03:54 PM|
|Cons_Table||not tryin to steal the thread...but i was curious what the issue was with the skyjacker control arms and bushing set-up?|
|08-27-2009 02:51 PM|
I agree 100% with everything said about the SkyJacker kit. Especially in regards to the control arms.
The RE seems popular are you rarely hear of any problems. Between the two I'd go with the RE kit.
|08-27-2009 02:36 PM|
|4point||The RE is hands down a better kit.|
|08-27-2009 02:19 PM|
My other direction is the RE 3.5" standard. I can upgrade the kit with OME for $150 or with the RE Mono tubes for $100. Rubicon Express - RE7002 3.5 Standard Kit FREE SHOCKS it is a complete kit, still has a transfer case lowering kit but thats what im going to have to roll with for the time being $$$.
Disconnects and cam bolts for the CA's are going to be purchased as well. RE is a much better kit correct? plus i can add on top of it to make a superflex kit etc.. in the future
|08-27-2009 01:48 PM|
"No reviews" speaks loudly to me.
Maybe that's just me...
|08-27-2009 01:42 PM|
|4point||You may or may not need the SYE/DS with this kit, but it would be a good idea to get one to relieve drive line stress. 4"s and up is the rule. The biggest problem with that lift is does not address the front track bar correctly and the CA's are rigid. The arms need to flex with the suspension to avoid pressure on the CA brackets. Also the dropped pitman arm is not needed with this kit. As for the shocks and coils(?) I don't know how good they are. This is a bottom of the barrel type of price/kit so do not expect much.|
|08-27-2009 01:37 PM|
|08-27-2009 01:26 PM|
No Reviews (is this a good lift?)
Skyjacker 4" Economy Lift Kit with Hydro Shocks for 97-02 Jeep® Wrangler TJ - Quadratec is this a good lift? and would i need SYE and CV drive shaft?