|09-01-2009 08:55 PM|
(Not sure if a loop would hurt it as long as it wasn't kinked.)
I thought mine might be doing that,(plugging up) but the new M/C cured it. Looking around for a replacement line, I found this;
Jeep Parts, Jeep Accessories & Jeep Soft Tops From The Jeep Parts Experts - Quadratec
They list it as being for a 4 cylinder. An E-mail to them said it might work for a six cylinder too, but they couldn't guarantee it.
I may try to find out if they lines were different between the different engine options.
|09-01-2009 03:05 PM|
|morphious||yeah and i was talking to him yesterday and he said he already replaced it. so ur most likely right about the master. but he said their was a loop in the hose that conects to the slave so i thought maybe the loop was the culprit.|
|08-31-2009 11:44 PM|
|08-31-2009 11:15 PM|
|morphious||well u can try the master but it really sounds like the slave to me but for the money give the master a shot then u will know for sure|
|08-31-2009 10:35 PM|
Master cylinder was $69.99 at Advance Auto yesterday. Rebuild kit was about $40.00.
I opted for the new master. Working well, here's a link to my bleeding procedure;
JeepForum.com - View Single Post - Clutch problems
|08-31-2009 09:04 AM|
|morphious||ur going to have to deal then sounds like a weak slave to me and that requires u to pull the tranny|
|08-31-2009 12:12 AM|
clutch peddal adjustment or bleeding?
The 1st time I hit the clutch peddal after not using it for 5-10 min. the peddal goes to the floor like its not connected, but works fine after that. I've bleed the clutch 4 times & it hasn't changed. Is there an adjustment on the clutch peddal or is there a special way to bleed it? Or do I have to replace the master cylinder. Is there a rebuild kit available for the master cylinder? money is tight. If it cannot be fixed inexpensively I will have to live with it.