|09-10-2009 11:40 AM|
|andrew2456||The bleeder is on the trans. If it's a 4 banger it on the pass side and if a 6 its on the driver side. You need 2 people to do it. It looks like a little rod sticking out of a hole with a big nut and small bleeder sticking out of that.|
|09-10-2009 07:44 AM|
Bleeding External Slave Cylinder '95 wrangler
Is it possible to bleed the slave cylinder that activates the clutch on these ? I see a set screw on the cylinder, and wasn't sure what it was for. Clutch works fine for about 5 min., then it doesn't want to disengage any longer.
Is there a way to tell if the slave cylinder is bad ?
Hope someone can help.