|09-16-2009 09:58 AM|
|mudslinger150||t-case is connected to the skid plate with 4 studs yes.|
|09-16-2009 09:54 AM|
is the Tcase mounted with bolts to the skid plate ?? now its starting to make sense..
i thought the transfer case was mounted to the frame and the skid plate was just mounted to the frame rails and wasnt connected to the tcase..
is this correct ?
|09-16-2009 09:51 AM|
|mudslinger150||the tcase rests on the skid plate, the skid plate is what holds up the t-case, so when you drop the skid plate the t-case goes right along with it, so the skid plate drop is known as a T-case drop kit|
|09-16-2009 09:17 AM|
i think ive been wrong all this time, it appears that the only drop was the skid plate, i dont think the tcase was dropped, and now looking back at the install sheets online, it doesnt show a tcase drop, just spacers for the skid plate, so i guess i dont have the tcase drop. hmmm... NOW, i am really really confused.. im assuming the skid was needed to be dropped so the driveshafts didnt rub it or hit it..
i need a book. do they make "Jeepin for Dummies" ???
|09-16-2009 09:00 AM|
|mudslinger150||even if you dont get vibrations with a 4" kit i would still add in the t-case drop bracket, it is not designed for vibration reduction it is to keep proper drive line angles a.k.a. - not wear out your dirve shaft. I would either save some money and do it right with a cv drive shaft or put in the t-case drop kit.|
|09-15-2009 11:16 PM|
|sublimemaze||So what is the negitive side to the transfer case drop spacer kits? just losing a little belly pan clearance or other things? What do the driveline vibrations feel like and when do they occur? -Thanks|
|09-15-2009 12:27 PM|
|09-14-2009 07:15 PM|
|csamn2007||I saw some guy on the trail the other day he had a 5.5 inch lift and a 2 or 3 inch t-case drop, what a waste!|
|09-14-2009 06:37 PM|
i have same RC kit. 2.5"
mine came with tcase drop as well, supposed to keep the correct drive angles so as not to stress the shafts.. i think..
BUT - i have seen pics of 4 inch kits as well as 2.5 or 3 and none or most of them DO NOT have a tcase drop...
is it necessary to use the tcase drop, or is it ok to remove it.
i have heard that if you do not have driveline vibrations to just keep it, others seem to have no issue without it..
im confused.. is it needed or not, and why (if removed) would it be better to get 1" motor mounts..
|09-14-2009 04:24 PM|
|09-14-2009 03:17 PM|
|munroejp||Did you have to adjust the linkage too as well as the t-case plate?|
|09-13-2009 09:10 PM|
|tarheel||I am running the 2.5 alone. It flexes well and the ride was stiff compared to my stock condition. I did lower the tcase since I did not do the BB/MML. May do that next year and get a tummytuck. I got the springs for a 4.0 with a winch. I have run this 6 months now and will just be putting a FabFour bumper/winch on next week. Over all I was pleased with what I got and the service I received. The order came in 3-4 days. I ordered from Jeffrey @ Rough Country directly.|
|09-13-2009 07:16 AM|
Rough Country Combo Lift 2.5" + 1.25"
Thinking about buying...
Has anyone installed the Rough Country combination (2.5" + 1.25") lift?
Was wondering if I will have to modify anything in order to install?