|09-18-2009 07:13 AM|
i actually ordered the stuff over the phone so i had a chance to talk to jason. he is a great guy and really knows his stuff. we actually spent 20 mins talking about accounting software and credit card processing rates b/c we both have the same system. it is great to do business with a place that knows their stuff and will actually talk with you rather than just taking your $$ and hanging up. definitely a great company, it was not my first order with them and certainly won't be my last. (ftw, $439 for a 4" rough country lift kit )
|09-18-2009 01:23 AM|
You won't regret it. TCase and axle gearing are two of the best ways you can spend money on your rig.
You an also never go wrong with Jason at 4x4Groupbuy. I spent about 5k with him when he was based here in AZ about 5 years back. Great guy to work with and great guy to wheel with.
|09-17-2009 07:17 AM|
|jgano23||well, i can't hep you with the $$$, but if you need used parts out of any jeep call this place: Northfield 4x4 (610) 377-3992. they are in Lehighton, Pa. this guy is great. i have gotten a lot of parts from him in the past. he has parts and rebuilds jeeps. he only sells used parts that are in great shape, no garbage, and his prices are great. he has tons of parts from doors to output shafts. i can't say enough good about this guy.|
|09-16-2009 09:05 PM|
|09-16-2009 09:02 PM|
|09-16-2009 08:56 PM|
awesome, i love buying parts with crap i sold.
hey, you can go ahead and send a 4:1 kit my way to, since you's got all dat money layin around.
i'd have some money for my build if that tj axle would sell.
|09-16-2009 08:49 PM|
|jgano23||ok, so i did it this afternoon. i got the teralow and a dana 300 rebuild kit from 4x4groupbuy.com (great place to deal with by the way. great prices and very nice knowledgeable staff.) i also ordered a set of used input and output shafts for $75 total including shipping. and i paid for it using money that i accumulated by selling other jeep stuff on ebay!!|
|09-14-2009 08:03 AM|
ok, so i got some pricing on both the lomax and teralow.
|09-13-2009 09:46 PM|
|jgano23||that was what i was going to do. i definitely can't afford $1415. and really, all i need are the gears and a front output shaft. i am going to get a stock used shaft though. i don't think i do nearly enough wheeling (and certainly not enough hard core wheeling) to justify that entire kit.|
|09-13-2009 09:39 PM|
i'm not putting all that in my d300, but it might be worhtwhile to only do it once. i doubt just by putting the gears in the rest will blow up. it is possible if you're dumb behind the skinny pedal. i would just do the gears w/ the rebuild, but i can tear it apart again without caring.
its the same as everything else we do, gotta weigh it on the scale. i do like the lomax also.
|09-13-2009 08:40 PM|
|jgano23||i was hoping you would make your way in here. ya, they are definitely not cheap. i really like that the lomax because their gears are not welded or pressed, they are machined out of one piece of metal. just the gear set is $600. i am hoping that is all i need for now. the rotation plate and imput gear is another $250; a heavy duty front shaft is $175, and heavy duty rear shaft is $390. a grand totat of $1415. that's a lot of coin right there.|
|09-13-2009 08:25 PM|
|jpdocdave||definately get it, but i have searched and haven't seen that many outlets either. not cheap either.|
|09-13-2009 08:19 PM|
Low Range T-Case Questions
i took the dana 300 out of my cj, and it needs to be rebuilt. we figured while it was out and apart we might as well put in the 4:1 low range kit in there (well, actually we are still batting the idea around). anyway, the 2 kits that are known and out there are the teralow kit and the lomax kit. i don't really care which one i get b/c i have read thread and reviews on both and they are both strong kits. my question is, where can i get them. jbconversions.com has the lomax kit, and 4x4groupbuy.com has the teralow, but is there any where else? i like to support local business, but no one anywhere near me has or can get either one, so it seems i need to get it online. price is always an issue, but service and support are important also. i would rather pay more, but know that the company cares about and helps their customers. if anyone has any ideas please let me know. thanks guys.