|10-14-2009 09:57 PM|
|Tazman2||If you still want to run 33 i would replace the whole lift kit that you have and put a new 4" in. it will save you alot of time and a magor headache down the road. i had to help a buddy with his and we finnaly got it done last night had almost the same problem. it might be alot but it will be worth it down the road. and don't put a body lift in, i have one yes theirs alittle bit of differance but unless your going to tuck your tranny, T-case, and gas tank their not worth it. thats what i plan on doing is tuck every thing I have a one inch and I still going to have to cut floor pannels.|
|10-14-2009 09:44 PM|
|Jp90Talon||Ah I forgot that she already had the 2" budget lift. Im tired and was thinking how my 2" OME kit came with a TC drop kit that I didnt use.|
|10-14-2009 09:42 PM|
|jdhallissey||I don't know why you would need a tcase drop for a 2 in lift??????? Changing were the body sits has nothing to do with the driveline either.|
|10-14-2009 09:41 PM|
|jdhallissey||I have seen one that didn't require anything. To drill 2 holes is much cheaper then a mml kit. The best thing to do is install it if it rubs it rubs. You fix the rub, figure out first before you toss another 100 bucks into it. I am trying to save you money so you can upgrade more|
|10-14-2009 09:40 PM|
|10-14-2009 09:40 PM|
|CMEvans79||Any more pic's?|
|10-14-2009 09:39 PM|
|Jp90Talon||Dont forget that with the MML odds are you can skip the tcase drop kit as well. To me it was just easier.|
|10-14-2009 09:36 PM|
with a 1.25 BL, everyone states, drilling a hole to remount the radiator so the shroud can fit or something, id just get the MML and not worry about it.
you have to move the radiator shroud either way, idk if it was drilling or buying a mount for the radiator, either way there more then JUST the BL.
|10-14-2009 09:33 PM|
|jdhallissey||closer to stock is better in a way. For what is getting installed you do no drilling.|
|10-14-2009 09:26 PM|
|BeepBeepImaJeep||i would rather not have my father drill on my jeep parts unless her dad is better than mine, plus getting the geometry closer to stock the better, right?|
|10-14-2009 09:25 PM|
|jdhallissey||I wouldn't do the mml personally. I truly believe it is a waste of money.|
|10-14-2009 08:48 PM|
Thanks guys DD
i'm just going with the JKS 1.25 BL and MML!
Its getting a little cold to get the top off! but as soon as it warms up im allll over it :P
|10-14-2009 08:08 PM|
|10-14-2009 06:50 PM|
First of all, welcome aboard to the best Jeep Wrangler forum on the net!
Take your time and don't rush into anything. Lift kits can be expensive, especially if you have to pay to have them installed.
Wheel your Jeep for awhile and get the feel for it, and enjoy, there's nothing like a Jeep!!
Post some pics of your Jeep when you get a chance.
|10-14-2009 06:39 PM|
|jdhallissey||You can run either a 1" or 1.25" they will look the same. They will work the same and give you room for adding armor when you decide to start wheeling it!|
|10-14-2009 05:36 PM|
dose anyone have experience with a 1" or 1.25" body lift?
can you "see" a difference?
it way cheaper and easier
i just looked at Beepbeepimajeeps post, that black jeep looks awesome! and my jeep looks close in height as his red one!
not bad, but i want some more height and idk if 1 inch will help, ya know?
|10-14-2009 05:35 PM|
Hey can we get some help over on Isle 13..........
|10-14-2009 05:32 PM|
If you add a 1" or 1.25" body lift (do not go higher) you'll be well set up to handle 33" tires both on and off road and shouldn't have much in the way of rubbing . . . and it won't break the bank. Be sure to get it off the pavement from time to time . . . it's a Jeep!
|10-14-2009 05:28 PM|
ok, hmm so would a 2 in body lift look bad! i parked next to this guy at my school, and his made mine look like a girls jeep, his window started like 3.5-5.5" higher than mine!!
i want it to growww :P
i dont even think i would notice 1inch, do you?
|10-14-2009 05:24 PM|
|BeepBeepImaJeep||if i'm correct, thats what ive got! 2" puck lift!|
|10-14-2009 05:23 PM|
|motokeen||If your not going to leave the road that much just add a 1inch body lift and you should be fine. Even though body lifts suck. You won't be able to notice a 1 inch that bad and it will give your tires a little more room to move. Then just drive it and enjoy.|
|10-14-2009 05:19 PM|
Chances are i wont leave road much!
i want it to look sweeet, but i mean ive looked at 4" suspension lifts, and there like 1200 bucks!
plus that SYE and and the other part needed...
also im afraid of DW.
|10-14-2009 05:17 PM|
|MR.CLIFFORD||looks like a 2" puck to me.|
|10-14-2009 05:16 PM|
|motokeen||^I agree looks like a 2inch puck.|
|10-14-2009 05:13 PM|
I'm guessing that you have a 2" budget boost or spacer lift and that's it. From what I can see it doesn't look like you have a body lift. This is a bit low for 33" tires and you should either have a 4" suspension or add a 1" BL if I guessed correctly as to your current set up. What do you want to accomplish? Are you looking for something to take offroad or more of a cool looking onroad Jeep?
***Looks like we were all typing at the same time . . . amazing how much attention the females get around here!
|10-14-2009 05:13 PM|
Well, it looks like you already have what is called a Budget Boost by the looks of those spacers between the coil spring and the top of where it usually sits. That would be what is allowing you the 33" tires. I think the body part looks like stock.
If you want to get more height, I would say to move to a regular spring lift and remove the budget boost. If it is done properly, and with decent parts, it will ride as good or better than stock.
And Welcome to the forum
|10-14-2009 05:12 PM|
|MR.CLIFFORD||Looks to me like you have a 2" budget boost puck on top of stock coil springs. The body lift looks like stock pieces to me.|
|10-14-2009 05:11 PM|
looks just like the suspension on my jeep, dirty and worn out, haha
|10-14-2009 05:04 PM|
no no Just joshin' :P
body lift loc:
space between wheel and jeep:
my step mothers camera wouldn't focus worth crap! sorry for terrible quality
33" AT tires. 00' jeep TJ..... idk anything else.
|10-14-2009 04:52 PM|
|This thread has more than 30 replies. Click here to review the whole thread.|