|10-20-2009 04:08 PM|
|ekytrader||All I know is if your gonna have any power and MPG you have to get rid of the stock 4-6 cylinder engines. The will run forever but they suck...|
|10-20-2009 04:07 PM|
|10-18-2009 01:08 PM|
that wouldn't be a magnum v8 would it?
|10-18-2009 10:01 AM|
|uplifted||I squashed my ford 302 in favor of a GM zz4 crate engine... backing it up with a 700r4 and adapting to my 231 transfercase....i have the 8.8 rear ready to go in as well..|
|10-18-2009 07:50 AM|
|10-15-2009 01:25 PM|
get the motor tranny and transfercase all ready to go first. then set it in build your mounts (lot cheper than buying) Set it in bolt everything up and your almost done.
(decide if you want elec or motor mounted fan).
need a shifter
a different rear end (i put an 8.8 bolted right in $125)
need driveshafts I know a cheap reliable driveshaft answer
everything else bolts right in ex: powersteering, power brakes etc..
its a lot of work.
if i was going to do it all over againg i would have rebuilt my 6 cyl to reach higher horsepower and rpm's..
|10-15-2009 11:27 AM|
|10-15-2009 11:20 AM|
|yj-genral||novak is where its at!!|
|10-15-2009 11:19 AM|
|yj-genral||Adapting Ford Engines to the Jeep NV3550 Transmission|
|10-15-2009 11:17 AM|
|yj-genral||to put the 289 or 302 in you would of course need all the computer stuff with it, those are EFI right? other than that you would need a different tranny, even if AA made a conversion i wouldnt put even an ax15 behind it, need something heavy duty to hold up to the HP. then depending on what tranny... you might need a new t-case but depending on what you end up with you might be able to adapt to it...|
|10-15-2009 10:37 AM|
|ekytrader||Does anyone know if there is plates and such out there that will allow you to just drop a 289 in and just go without changing a whole bunch of stuff?|
|10-14-2009 03:39 PM|
|ekytrader||I have an awesome 289 that I would like to stick down in mine. Get all the HP a person would ever want and great MPG also.|
|10-11-2009 01:36 AM|
|cwbymt1973||Jeep technical information, transmissions, transfer case, engines, axles, types, models Here is a link that covers all kinds of tech stuff for the jeeps and covers v8 swaps and axle swaps too.|
|10-10-2009 05:44 PM|
|uplifted||As i'm learning from research, if your going to do a v8 swap, use a chevy SB.... there's not a whole hell of alot of options when using a ford and the market is very small.... PM me if your serious though.. I have done extensive research in the last few weeks and can pass along what i have found..|
|10-10-2009 05:28 PM|
|southernculture||look on advance adaptors for an adaptor plate and fnd some motor mounts. If it is carbd should be straight foreward. I think that u should do some research on it before u just jump in tho.|
|10-10-2009 04:01 PM|
Is it easy to convert a YJ over to a V8
I have a 94 Jeep Wrangler and it has absolutely no power and only gets about 9 MPG or so. Is it possible to convert it over to say a 302 oe a 289 that I have in the garage. I would have all the power I would need and get great MPG.