|09-22-2013 11:07 AM|
Here's my flasher I finished just now following his guide.
|09-22-2013 01:25 AM|
I appreciate it, I really didn't want to do all the soldering to that unit, He has a link to Gold Coast, to buy the modded unit already done for like $30.oo..!
Thanks again..! The stuff on that site, There's tons of it on there..!
|09-21-2013 05:51 PM|
|09-21-2013 05:50 PM|
|aparke4||Ignore the stock holes in the rear- I am just going to find a plug that fits rather than weld in a piece.|
|09-21-2013 05:44 PM|
|aparke4||Front amber 3/4 led for side marker and turn:|
|09-21-2013 05:44 PM|
|09-21-2013 05:43 PM|
|09-21-2013 05:41 PM|
I have two small 3/4 led flush lights as indicators and are not really bright enough through the tint to use as true back up lights.
I have one led dually wired into reverse light circuit on a three way switch for manual use as well.
|09-21-2013 04:16 PM|
I bought them on amazon, I'll find a link when I get home
|09-21-2013 03:21 PM|
He has a led reverse light to the bottom and left of the tail light you can see it in the one picture.
|09-21-2013 01:41 PM|
|09-21-2013 01:29 PM|
|aparke4||Here are mine:|
|09-20-2013 10:01 PM|
I went with the maxxima hybrids they have the reverse lights around the outside of the stop tail turn. I didn't want to have to put in a separate reverse light and I didn't want to break the bank. I got them and the pig tails for $60 on eBay and my dad had the holesaw. Their super bright. The only thing I don't like is they aren't completely flush. They stick out about 3/4 of an inch
|09-20-2013 10:00 PM|
|Tom95YJ||Not on a TJ , but I just did some on my 89 I had to buy an electric relay for my signals, I also had to do the same when I did led's when I flat fendered my TJ|
|09-20-2013 09:52 PM|
|Hardermods||BTW: Here's mine I just did tonight.|
|09-20-2013 09:45 PM|
|Hardermods||Check out Stu Offroad he has all kinds of write ups for doing the led mod, plus whats needed to mod your flasher so they wont blink fast.|
|09-20-2013 10:46 AM|
here is another pic, yea they were super easy and came out good, they are MAXIMA and here is the link if it still works M42323R:*4" Round Red Flange Mount Stop/Tail/Turn Light
if not the model # is m42323R
|09-20-2013 10:35 AM|
|Nothing but a jeep thing||Attachment 363217|
|09-20-2013 10:13 AM|
|12vtman||Which flush mount LEDs did you get Stumpbuster, those look pretty good.|
|09-20-2013 10:05 AM|
I did the cheap way, but still love it and get a lot of compliments.
I did the flush mount 4" leds that don't require cutting up your tub, and bought the plastic diamond plast corner gards for a fraction on the price of steel ones. prob not preferred but like I said happy with it.
just had to change out the flasher relay for a few bucks and I was good to go
|09-20-2013 09:20 AM|
|Nothing but a jeep thing||.|
|07-30-2013 12:23 PM|
|Nothing but a jeep thing|
|07-29-2013 09:44 PM|
Love my led light super bright
|07-29-2013 09:24 PM|
|CountryBoyJeep||I highly recomend it with crusher corners. I did mine through poison spyder. The only main thing that upsets me about the mod is my turn signals blink way faster now, you can mod the relay/flasher pin, whatever you wanna call it so it goes to a normal pace. Theres a thread on here somewhere. Very bright & well worth the money though.|
|07-29-2013 08:57 PM|
|Nothing but a jeep thing||
Led tail light mod
I was considering changing the look of my tj without buying crusher corners with the round lights. Went online and found many different options on led 4 inch round tail lights. I was wondering what kind of electrical mods will I run into and checking if anyone knows of a step by step process. Measure twice cut once I believe applies here. Any pics would be great.