|10-09-2013 07:50 PM|
|10-09-2013 07:47 PM|
|10-08-2013 11:16 PM|
|Patriot12||I am getting a 1.75 inch suspension lift with shocks on my 2007 Sahara. I have 28 inch nitto trail grapplers with 18" stick rims. I am think about putting on 31" trail grapplers with the kit...any thoughts on what I should do about the tires?|
|10-08-2013 11:07 PM|
|Thornwood||maybe a caliper hung up, you could jack up a wheels and see if they spins freely|
|10-08-2013 10:40 PM|
|Wacky||Maybe a steering angle sensor? They have been known to do the same thing. Not sure if it is on a Jeep. Just a thought.|
|10-08-2013 10:27 PM|
|TABORNATOR||Ok got the Jeep back and it no longer pulls to the left and the ABS light is not coming on !!!!!!!! BUT! I have a grinding noise coming from the right side? Not brakes but maybe something to do with the ABS?????|
|10-05-2013 06:28 PM|
|10-05-2013 06:18 AM|
|10-04-2013 05:56 PM|
|Tweak||before you take it and leave it somewhere for a few days why not take a 15mm wrench and spend 5 minutes centering your wheel?|
|10-04-2013 11:14 AM|
350? I just checked on parts and Moog Replacement part is only $150.00. I think $350.00 sounds a bit much. But that will be the next thing I try.
1st - New Wheel Sensor..............
2nd - Full 4 Wheel Alignment........
3rd - New hub Assembly.............. I Don't think there is anything else to fix is there?
|10-04-2013 07:01 AM|
|doufus1||Just had the same issue fixed. Wheel hub was worn to the point it was wobbling a small amount. The wheel speed sensor picked the small wobble up. Thought the wheel was turning at a different rate to the others. Causes the traction control, Esp to kick in. $350 to get it fixed.|
|10-03-2013 02:49 PM|
|TABORNATOR||They didnt mention any codes, and when the ABS lights came on along with the steering stabilizer light they only stayed on 20 min....... by the time I got back to the dealer they were off! ????|
|10-03-2013 02:43 PM|
|TABORNATOR||Well the dealer I bought it from ( Evolution Auto Sales) in Sanford Florida opted to not send it to the Chrysler dealership. Instead they replaced the wheel sensor and figured all was well. I show up to get my Jeep and noticed that the steering wheel is still slightly leaning to the passenger side. I explained it to the service manager but he insisted that it was fixed. I got 5 miles away and everything started again. Needles to say they were shocked that the problem was still there. They still have my Jeep and decided to send it out to a "Special Shop" for lifted vehicles LOL!!!! I did make it a point to tell the manager that if the steering is out of alignment even 5 degrees it could fail and mentioned that replacing the wheel hub assembly may be a good idea also. FML!!!!!!!!! I just want my Jeep back and i working order......... (still frustrated)|
|10-01-2013 10:58 PM|
|Tweak||any codes? I would assume there is a code for wheel speed sensor, which is what I am leaning towards. it takes my 13 a good bit of crookedness in the steering wheel (enough to say "damn thats crooked!") for my ESP to go nuts.|
|10-01-2013 10:46 PM|
|10-01-2013 11:46 AM|
|JKjingle||My jeep did the exact thing after I lifted and my steering wheel wasn't centered (had to run my stepmom somewhere). The grinding noise is the ESP system trying to correct a slide it's braking on certain wheels which is making you jerk around. This went on for about 5 minutes then the computer knew something was wrong and it shut off all ESP and ABS functions and the warning lights came up. Your steering wheel only has to be off by 5 degrees for issues to occur. If it is centered you may have a dead wheel sensor or something else the dealer will sort you out.|
|10-01-2013 11:23 AM|
|TABORNATOR||It is lifted and I bought it that way. It is going to Chrysler today to hopefully rectify this issue. This is why I named her "Pain in the ASS"!!!|
|10-01-2013 09:49 AM|
|ESP||Is your jeep lifted + did you center the steering wheel?|
|10-01-2013 09:41 AM|
|TABORNATOR||It was driving perfect ......it started all this out of the blue. Steering wheel seems to be straight. Thought it may be a wheel speed sensor because it seemed to stop when I turned off the traction control but soon after all the warning lights came on.|
|10-01-2013 02:43 AM|
could be faulty brake pads or parking brake not fully disingaging. does the steering need correction? does it only coast real bad after a slight bump? if so, you might need to change bushings.
Since we are not seeing your truck, we cannot give you exact advice. best way is to visit your mechanic and have him checkout front axle and brakes.
|10-01-2013 02:22 AM|
|09-30-2013 11:18 PM|
|TheIronWolf||Ouch, sorry man. I hope some experts here will help you to figure this out....|
|09-30-2013 11:10 PM|
Need some help!!!!!!!!!
Driving my 09 2dr Rubicon and it started to jerk to the right pretty bad, it continued to do this until I turned off the traction control. Got home and parked the Jeep but when I drove it later on it started it again and then the ABS light came on along with the traction light and one other light? Just got the jeep and don't have a clue what this could be......also it sounds like something is slightly grinding when you hit the gas in just the right spot between accelerate and coast ??????????????????