|01-12-2010 04:45 PM|
|NAVYCHIEF||good on ya. those flashers can be toughies.|
|01-12-2010 04:03 PM|
|93wrangler||Update. I got the flasher replaced...just had to man up and show it who is boss. But everything works great now.|
|01-12-2010 02:22 PM|
|NAVYCHIEF||the flasher pulls straight out. they may be a little corroded.|
|01-12-2010 02:07 PM|
|kirok||I'm experiencing the same problem. Replaced all the indicator lights and it does not blink on and off when I engage it. I will check on the flasher. Thanks.|
|01-06-2010 03:29 PM|
|93wrangler||alright, may sound stupid but how do those flasher fuse things come out, i see something that says turn but I don't feel it makes any difference.|
|01-06-2010 09:09 AM|
|RedWrangler||I've also seen this happen when a bulb burns out in some cars. DK if it's the same in the jeep. Check to see if all of the indicator lights light up on that side.|
|01-05-2010 11:43 PM|
|93wrangler||thanks guys! I will give it a try tomorrow and report back!|
|01-05-2010 09:32 PM|
|NAVYCHIEF||swap it out with the emerg flasher,right next to the turn flasher, for a quick test.|
|01-05-2010 09:01 PM|
|95riogrande||x2 bad flasher|
|01-05-2010 08:44 PM|
Sounds like you have a bad flasher.
It is the round canister (silver) located on the upper left of the fuse box.
They are very cheap at any parts store
|01-05-2010 08:38 PM|
Question, please help!
Alright, so my turn signal is sort of malfunctioning. When I move the lever to engage the passenger side turn signal all goes according to plan, when I move the lever to engage the drivers side turn signal the light in the dash comes on, the turn signal lights on the front/back come on but they don't flash like they are supposed to, they just remain in the on position.