|01-19-2010 12:52 AM|
As long as it has the 5 on 5 Bolt Pattern, it should fit fine. As far as I know, the X's, Sahara's, and Rubicon's, all have the same Bolt Pattern of 5 on 5. The Wheel Backspacing, I believe, is 44.25. Check with your Jeep Dealer to be sure that there will not be any rubbing. Looks like you're going to 33's, which should be fine with the X's Stock height.
Have you looked at Aftermarket Wheels, other than the Stock Jeep Wheels? If you're looking for cheap Take-Off's, that'll be pretty inexpensive, as I've seen them on Craigslist for under $1K for Rubber & Rims. However, when it comes time down the road to replace them, you may be looking on Craigslist again to replace your Rubber a lot cheaper, than buying from a Tire Store.
There are a LOT of Aftermarket brands that will fit our Jeeps. I just upgraded mine last Friday with Black Rock's. VERY happy with them!
Check Quadratec.com and 4WD.com for Wheels. You may find something you like!
Best of Luck & WELCOME to WF!
|01-18-2010 09:33 PM|
2007 Jeep Wrangler Unlimited X Tire/Wheel Help
Hi, I am new to the forum and I am hoping someone can help me answer a question.
I have a 2007 4 Door X. Currently, it has the standard 16" wheels with the Goodyear SRA's. I am thinking about buying a set of the 18" wheels/Bridgestone Duelers that come with the Sahara model.
My question is will they fit ok on my X model?