|01-28-2010 09:17 PM|
this should help you pick one
|01-28-2010 08:11 PM|
|01-28-2010 06:05 PM|
|LeGary||Novak Jeep Conversions - Home This is a good site|
|01-27-2010 09:52 AM|
|01-26-2010 06:21 PM|
Motor mounts link:
Jeep CJ Motor Mounts for Models 5, 7 and 8
these offset the engine to help with front driveshaft clearence.
|01-26-2010 06:17 PM|
Here check this link out :
Chevrolet & GM Engine Conversions into the 1980-1986 Jeep CJ
There are alot of people building on this site, there is just not alot of cj owners.
|01-26-2010 06:06 PM|
You may be pushing the limits of this forum. There are a few builders on here, but this forum is more geared toward small modifications, newer users and enthusiasts. (Which is totally why I like it!).
I'd suggest some Google time, read up on other threads, and then maybe working with Pirate 4x4 or one of the other forums more geared toward total build outs.
Remember, it's not cheating on this forum as long as your heart remains pure. :-)
|01-26-2010 06:05 PM|
I am doing the same thing, slowly.
I have bolted all mine in but it is removed now for restoration.
82' cj-8,9 inch ford rear,dana 30 front. 350 TBI,700 r4, dana 300.
I used the MORE offroad bomb proof motor mounts,and the Novak D-300
to 700 R4 adapter. have not got to the d-shafts yet.
Do some research alot of support out there on this swap.
I wish I could help you out more.
I would be alot further ahead if it was not for ice fishing.
|01-26-2010 05:49 PM|
|01-25-2010 10:53 PM|
|01-25-2010 09:44 PM|
|Geoff@Bestop||Try this link.|
|01-25-2010 09:41 PM|
|White95Wrangler||no one has any info?|
|01-25-2010 02:24 PM|
1985 Cj7 Chevy 350
Okay guys, I want to do this but I'm not sure what exactly what i need to do so. My cj7 is a 5 speed, with amc 20's i'm not sure on exactly what tranny i have and what else i have to do to get this 350 in it, I read you have to weld that's no problem at all for me but anything else? does anyone have a wright up on this for me?