|11-18-2014 02:46 AM|
|11-14-2014 11:26 PM|
|The Real Tink||
|11-08-2014 01:15 AM|
|11-07-2014 01:04 AM|
Angled Hard Top
Saw this Angled Hard Top on a Jeep Unlimited on Google Images and was wondering if anybody knows where it would be possible to buy one of these?
|06-17-2014 10:33 PM|
|WranglerReed||Looks good. How strong are the handles?|
|01-18-2014 11:31 PM|
All home made
|05-22-2013 04:31 PM|
$8 bucks for little vinyl rim strips
|05-22-2013 01:40 PM|
Cheap fog lights
Pulled them from a truck in the junkard
10.50 for he lights an mounting bar
maybe 15 dollars in wiring an fuses
|05-22-2013 12:07 PM|
|05-22-2013 09:45 AM|
|groovebus||13" rubber Off road antenna $16 from Amazon.com. Got tired of the stock metal one slapping the crap out of my windshield everytime I get into the brush.|
|01-19-2013 12:04 PM|
This one will swivel up enough to light the shifter area well if needed...
This one is the Dash Cubby... I can reach it fron the driver's seat easily...
|01-19-2013 12:01 PM|
I have a 2013 JKUR, and one of the first things I noticed, was the lack of any lighting in the Dash Cubby, and the Console Deep Cubby.
Thought briefly about installing some hardwired lights in each. With the CANbuss being what it is, and my distaste for white light in the dark, I went looking for an alternative.
Bought 2 Princeton Tec FRED Hero Headlamps. About $25.00 each. They use 3 AAA batteries. First press of button gets you "low red", second press gets you "high red". If your first press is 2 seconds long, you get "low white" and second press gets you "high white". Third press always goes to off.
I took them apart (removed the light head from the base) and used a hot air gun to take the slight curve out of the base and make them flat. Do this carefully and all will go well...it would be possible to overheat them, just be careful. Then re-assemble the base to the light head...(Phillips Head Screws).
A couple of strips of VHB Double Stick tape.
Next post for the "done" pictures.
|01-19-2013 09:11 AM|
|01-18-2013 09:46 PM|
|01-18-2013 01:22 AM|
Black liquid shoe polish works great to renew faded fender flares...
Did mine over a month ago and it has held up great so far... cost about $2.00 and did all 4
|01-18-2013 12:54 AM|
|01-18-2013 12:27 AM|
glad im someones hero but i would really like to know what the heck it is still.....lol
|01-18-2013 12:19 AM|
|01-18-2013 12:16 AM|
|01-18-2013 12:13 AM|
|01-18-2013 12:06 AM|
i dont wanna sound stupid or anything....but what the heck is plasti dip??
|01-17-2013 11:36 PM|
|Bhealey28||Just did the gutter gaurd grill a few days ago looks amazing in person but ill post a pic anyway.|
|11-05-2012 03:33 PM|
|11-05-2012 12:49 PM|
Plasti dip and some spray paint.
|11-02-2012 11:07 AM|
|Iceman||It did get awful quiet round here.|
|11-02-2012 08:37 AM|
|Infantrytim||Bump new ideas|
|10-24-2012 11:38 AM|
Almost forgot a couple more.
1) Led light conversion on the gauge cluster.
2) cut the vent tube on the gas tank to convert from 15gal to 19gal
|10-24-2012 08:43 AM|
Here are a few mods I've done, some mentioned some not.
1) 3/4" pipe insulation on top bow
2) Krylon fusioned the flares
3) Hand throttle
4) Dome light kill switch (fuse taps in the #4 fuse port inline fuse and a switch)
5) Top prop (~4-5' 1" pic pipe 2 3x1 reducing tees (or bondable saddles if you can find them) flex into place between rollbar extensions and eliminate the puddle over the front seats).
6) In cab winch controls (16/3 wire (old extension cord works great) safety switch and a spdt switch (single pole double throw)
7) Pencil beam spotlights (GE 4509 bulb (available at Napa) par 36 housings (harbor freight work lights) These lights are commonly used as aircraft landing lights.
|10-24-2012 02:17 AM|
|Randens Rubi||I have Plasti dipped my hood and bed lined my fenders with in the last two days. Very cheap, fun, and improves the look of the jeep.|
|10-23-2012 04:35 PM|
|JKZombie||This post serves as a bump for this topic, because I love these cheap mod topics. I will contribute by saying a used CB is always a great idea.|
|This thread has more than 30 replies. Click here to review the whole thread.|