|10-17-2013 07:00 PM|
|simonclay||Just so everyone knows. I contacted RC and my new wheel spacer is on its way. Their customer service is really great|
|10-15-2013 05:43 PM|
|truittsosebee||Well, I had a wheel come off 2 weeks ago with spacers that had been installed less than a month. On mine all five lug nuts came loose and were captured between the spacer and the wheel. Luckily, none of my studs broke or were damaged. . I am positive that no one had messed with them. I reinstalled them using Loctite this time. After reading this thread I just pulled all 4 of my wheels and checked them again. All were still nice and tight. I'm going to make it a point to check them every couple of weeks for a while.|
|10-15-2013 05:30 PM|
|simonclay||They were hubcentric. I don't think there was anything wrong with the spacer or with how I installed them. I think SOMEHOW my lug nuts came loose on that one wheel. I don't know how or when. But it did.|
|10-15-2013 09:54 AM|
|Maximum Carnage||If I ever put spacers which I might, I'm using BLUE Locktite.|
|10-15-2013 09:42 AM|
I never had trouble with my spacers. They were not rc but....
Are/were your rims/ spacers hubcentric?
I could see a non hub centered wheel moving enough to loosen the lug nuts.
My bet is attempted theft.
|10-15-2013 09:08 AM|
|OverkillYJ||I doubt it. I have heard and seen pics of them falling in jeeps repeatedly. Probably because they get more abuse then on other vehicles.|
|10-15-2013 07:29 AM|
|10-15-2013 07:24 AM|
|87 Florida YJ|
|10-15-2013 02:06 AM|
|kmrtnsn||Just so we're all clear, the "Jeep (did not) fell (fall) apart", as described in the title, but rather a junk accessory failed, as this particular accessory has been known to do with a high degree of both certainty and regularity.|
|10-15-2013 12:36 AM|
|SrPobre||Same happened on my XJ a couple years back. No spacers or adapters or anything like that. The answer is blowing in the wind I guess.|
|10-14-2013 09:46 PM|
Too tight.. might have been your problem on the broken ones.
The others I blame on attempted theft, the crooks probably couldn't get the other ones off (that ended up breaking).
|10-14-2013 05:15 PM|
|simonclay||I went out and took all of my wheel spacers off earlier. Two of the front drivers lug nuts were a little looser than the rest. But they all were so tight that I had to use an impact and hit them a few times to get them broke loose. I put all new wheel locks on and torqued them all to 95# and triple checked them all.|
|10-14-2013 05:09 PM|
If this is NOT foul play...... I would be VERY surprised. Odds of even ONE coming loose are slim......TWO downright negligible........THREE.......I am no detective BUT........someone loosened those.
Torque is about placing the correct amount of interference between two incline planes. Too much..... and you risk SNAPPAGE..... not loosening. Too little..... you risk spin off. The fact that three were off and two were left on indicates correct/over torque on two and too little on three...........odds are WAY against that.
|10-14-2013 04:23 PM|
Perhaps someone tried to steal your wheels, but ran out of time, or got spooked and split?
I would check ALL your lugs, just to make sure they are all there and tight.
|10-14-2013 03:09 PM|
|Charley24||Wheel spacers just need to be maintained like anything else on your rig. I've run them for more than a year without any problems.|
|10-14-2013 02:59 PM|
|simonclay||I understand where you're coming from. I don't know if it was a defective product or an accident or foul play.|
|10-14-2013 02:45 PM|
|harleydragon||if the lugs had snatched out of the spacer then I could see a complaint.But,with 3 lugs missing and the other 2 studs broken,I can't..that could just as easily happen on a stock hub.I had it happen to a stone stock Z71 with factory wheels.I think my lugs had some help coming loose but a couple of them broke just as this one did|
|10-14-2013 02:23 PM|
|1987Wrangler YJ||Ask them to send you out a free replacement and for the torque specs.|
|10-14-2013 02:11 PM|
|simonclay||Yes. I did just a little bit ago. No response yet|
|10-14-2013 01:57 PM|
|1987Wrangler YJ||did you contact RC?|
|10-14-2013 01:38 PM|
|simonclay||What do you guys recommend torquing the lug nuts to? I've heard multiple numbers|
|10-14-2013 11:19 AM|
You might want to check if the wife took out a life insurance policy recently.
|10-14-2013 11:16 AM|
|xjrjrx||My brother had a wheel fall off on two separate occasions without wheel spacers it just comes down to if all the bolts are torqued down all the way they can and will back off especially with new studs|
|10-14-2013 11:13 AM|
|simonclay||That's good to hear. These have been great until now. And I was driving about 40mph around a slight turn when it happened.|
|10-14-2013 11:00 AM|
|xjrjrx||I have been running wheel spacers on mine for quite a long time and have never had any problems with them at all I also rotate my tires every 5000 and check the torque on all the nuts every time I do it when I first put them on I checked them after every gas fill up like the install instructions said obviously wheels with proper back spacing are going to be the best option but my spacers have been nothing but good to me|
|10-14-2013 10:49 AM|
IF you were still capable of having opinions.
|10-14-2013 10:45 AM|
|simonclay||I had heard from a couple people that wheel spacers aren't the best option before I bought them. But I just chalked it up to them being "paranoid" and got them anyway. After last night I'm still not sure that they are horrible things that should never be used, but I hope other people will see this before buying them. Just to see what CAN happen.|
|10-14-2013 09:49 AM|
You have to think about how fast that component spins with the weight of the wheel attached. There is incredible centrifugal force being applied to the component. Over time it will loosen up multiple times and if you don't watch it carefully you're gonna lose a wheel.
|10-14-2013 09:40 AM|
|Raiders1901||Do you have a jealous ex or current girlfriend? That might explain it.|
|10-14-2013 09:29 AM|
|87 Florida YJ|
|This thread has more than 30 replies. Click here to review the whole thread.|