|02-16-2010 08:00 AM|
depending on the size of the tire there still wont be much room left inside.
but if you were gonna do it that way. I dont think it would take much to make a servicable mounting bracket attached to the stock roll bar. a couple pieces of square or round tube, and your stock bracket off the back door. this would be the simplest solution.
personally I built a tub mounted swing out for the back of the jeep.as I still have to have a back seat occasionally. besides, when i put my fridge in there it takes up quite a bit of space.
|02-15-2010 09:53 PM|
|woodsballnc||I was thing more of it sitting vertically to allow for storage space also.|
|02-15-2010 09:29 PM|
I am thinking about making one that will hold the tire in the (Baja) position and the bracket will mount in, in place of the rear seat.
This is still in the minds eye stage of fabrication though, I don't even have a drawing to scan yet.
Also I don't think it will work with larger tires. The tub is only like 36" wide inside.
|02-14-2010 10:08 PM|
|02-11-2010 10:35 PM|
|02-09-2010 08:20 PM|
Spare tire bracket help
Has anyone made a spare tire bracket to store their tire in the back up against the wheel well?