|02-21-2010 11:21 PM|
|Abomination93||fuse for the pump, relay for the pump, bad ground. i like checking easy stuff first like fuses and relays.|
|02-21-2010 10:20 PM|
i just wanted to use that.
|02-21-2010 09:41 PM|
|02-21-2010 05:48 PM|
|jpdocdave||well make sure you have power and ground at the pump before condeming it.|
|02-21-2010 05:33 PM|
its not the sensor looks to be the fuel pump i took off the fuel filter turned on the keys and nothing no fuel moving...
|02-21-2010 01:34 PM|
|cpaul3||cool ty ty ty|
|02-21-2010 12:53 PM|
|jpdocdave||most common culprit here is the crank position sensor, either did not get plugged back in, or wires got pinched between the trans and engnie. the sensor is toward the top of the bellhousing, and gets overlooked.|
|02-21-2010 12:48 PM|
well anything will help it was jacked up for 12 hours and i hope it will start today after it sat overnite. i didnt disconnect the battery someone said it might have a reset switch somewhere i need to reset ??????? i dont know thats why im asking
|02-21-2010 10:14 AM|
|Screwjack||I replaced a transmission recently, so let me think about it a bit and see what I can't come up with. In the mean time, somebody else on the forum that knows more than me will probably be along shortly with an answer.|
|02-21-2010 09:35 AM|
ok it turns over and over sounds like it is not getting gas... if i turn the engine over without the clutch in it pulls so i know the clutch is engaged but i didnt do anything but swap out the transmission.
|02-21-2010 08:03 AM|
|Screwjack||What is it doing? Does it attempt to turn over and then nothing, or the starter turns and turns but doesn't catch, or is it more like no power and the starter doesn't even turn?|
|02-21-2010 07:02 AM|
Help just replaced my transmission
Any idea?? i swapped out my 5 speed transmission yesterday and now my jeep will not start.