|04-21-2014 12:34 AM|
a nice add on for people traveling with me.
I got some TrekArmor seat covers & Warm Seats waterproof heaters.
I taped the heaters to the covers using some really good 3M tape.
Put the seat covers on & ran the wire to the rear of the center arm rest
drilled a 3/4" hole (had to enlarge a little) for the switch
Hooked power up to my Spod
Heaters work great
New TrekArmor seat covers
|04-18-2014 10:00 AM|
|04-17-2014 08:27 PM|
Hey guys, quick question! I'm scratching my head at this point. My jeeps been riding rough and wanting to stall(barely got it running again yesterday). I ran some diagnostics when the issues came up, and the computer gave me two error codes. P0320 and P0340. They were the crankshaft position sensor and camshaft position sensor. I replace the crankshaft position sensor. And assumed the code would clear. Buuuuut it didn't, at least that part is working now.
The portion I don't understand is where the hell is the CAMSHAFT position sensor in the 98 TJ sport. Me and my family have fixed all else but the jeep still wants it to stall when running. At this point I'm beginning to think that the issues lay in the wiring, not the parts themselves. But have no idea what I'm doing when it comes to the electrical system.
Sorry, if I didn't explain the problem well enough, it's pretty specific and don't want to make it seem like anything else.
|04-14-2014 06:50 AM|
let me know when i can pick it up.. i still havent plastic welded yet.. divorce and all..
|04-13-2014 09:31 PM|
|AwesomeJoshome||Need to change out my cam position sensor cause my jeep won't start. :/. Already changed out the crankshaft position sensor. Doing this tomorrow. Hopefully it all goes well.|
|04-13-2014 07:45 PM|
[QUOTE="Commandocon;9728058"] Great match to the new junior Jeepers seat! /QUOTE]
Yea, I really like the Recaro car seat!
|04-12-2014 10:05 PM|
|tjmach||Just finished putting my Hooker headers in and running a 3 inch exhaust with a borla muffler. Put in a steering pump cooler and relocated my brake line on the rear. Just in time. Heading to Moab EJS tomorrow, staying to Saturday.|
|04-12-2014 10:49 AM|
|wat3rdog||Looks good with that front winch bracket. There rear looks nice and clean.|
|04-11-2014 06:10 PM|
|kenb1023||Wired in My front 14" LED light to the sPod and Bumper mounted D2 LED backup lights to the backup switch. All I can say is they are bright.|
|04-11-2014 05:16 PM|
I found some old clearance lights in my drawer so I added them to my trailer the other day. I then broke a bulb so I upgraded the bulbs to LED replacements. Much nicer that the standard 10˘ bulb.
|04-10-2014 04:20 PM|
|04-09-2014 09:15 PM|
|Jt_Ripper||nice paul i need a place to store my top and then ill go topless all the time|
|04-09-2014 09:14 PM|
|04-09-2014 04:56 PM|
|Scampers||New front bumper. Birthday month lol|
|04-08-2014 08:39 PM|
Put on a new Bestop bikini, my spiderweb fits comfortably underneath if I feel the need for more sun lol.
|04-07-2014 10:49 PM|
|04-07-2014 02:34 PM|
You mean this LOD? Lol. Looks good
|04-07-2014 12:34 PM|
Saturday Wat3dog and I got the LOD rear bumper on. Still have a few odds and ends to put on like the HiLift mounting bracket but for the most part it is done.
Sunday I put the sPod in. Now just need to wire the lights
|04-07-2014 09:05 AM|
|04-06-2014 10:03 PM|
|04-05-2014 02:22 PM|
|Jt_Ripper||new evap canister.. and zip tied my transfer case cable up. seems the little plastic piece broke and my cable was floppy..|
|04-03-2014 02:06 PM|
|04-03-2014 12:43 AM|
Setup the ORO SwayLoc with my OBA Arb compressor.
And found a stock TJ on 33s to park next to. Finally. A modded TJ I'm taller than!
|04-02-2014 09:23 PM|
|Walle||Seat covers on.|
|04-01-2014 08:15 AM|
|03-31-2014 09:58 AM|
|03-30-2014 05:17 PM|
|03-30-2014 04:38 PM|
|BigJK||Installed the AeroForce Interceptor Gauges a few weeks ago, and the Trektop NX today (it was barely 60 degrees here, but with the sun shining on it, I was able to get it on pretty easily).|
|03-30-2014 08:59 AM|
|callbob||sounds good. right now in the process of re u jointing (is that a tech term) ALL shafts. Got rear done, pumpkin grease changed (more tech terms) all moving parts lubed. Now working on front. Got short shaft (not JT) re jointed last night, might just go ahead and do new ball joints while torn down. Bought a OCT u joint tool on Amazon, beats the hell out of hammer and socket method. only 4 more u joints to go.|
|03-30-2014 08:51 AM|
|This thread has more than 30 replies. Click here to review the whole thread.|