|04-24-2010 06:37 PM|
I actually just got done installing these pioneer 6.5's and didn't have to modify the openings at all. The stock mounting holes even worked.
Amazon.com: Pioneer TS-G1643R 6.5-Inch 2-Way Speakers: Electronics
I ended up with these after going to best buy and listening to all of the 6.5's side by side. They sounded better than the alpines and sony but not as nice as the infinitys. They were $54 plus tax in the store but only $34.49 shipped from amazon.
The grills look pretty decent and I never realized the light cover on the soundbar rattled that much after getting the new ones in (had to fix that). I also upgraded the fronts to 5 1/4 JBL's for $33 shipped from ebay and the adapter plates for $18 shipped from ebay. The plates seem like they will be a little flimsy when you take them out of the package but they actually provide solid support when they are all mounted up. I also cut off and reused the stock front speaker connectors and soldered them to the new speakers.
So I paid $86 total for 4 new speakers. I have a sony xplod head unit and it is night and day difference from the stock setup. Not a ton of bass but I wasn't expecting any. I can actually hear the radio now with top and doors off while going 70 down the freeway.
Moral of the story, some of the 6.5's fit without any modification and sometimes cheap is ok.
|04-19-2010 12:30 PM|
|04-19-2010 12:23 PM|
|04-18-2010 11:13 PM|
You only got 2 choices...if choice #1 doesn't work, try choice #2. If neither one works... go bang your head against the wall cuz you screwed up.
...or turn the radio on and turn up the volume a little. lol
|04-17-2010 06:22 PM|
|Born2run||did you find which was + and wich was -|
|03-10-2010 01:48 AM|
|Italia||If you look at the picture I posted of the wires you can see part of the enclosure. It's basically thin plastic.|
|03-09-2010 02:12 AM|
Can anybody get some decent quality photos of the openings in the stock sound bar?
I wanna see what it is you guys are having to modify to make the speakers fit...before I tear into it myself. lol
|03-08-2010 04:37 PM|
|Jsquared||I'd say stay away from Pioneers 6.5s. I had to do much more modification than I wanted to squeezing those in.|
|03-07-2010 06:55 PM|
Well, the speakers I were trying to use were;
Sony XS-GT1626A 6-1/2" 2-way car speakers also fit in 6-3/4" openings at Crutchfield.com
They sounded great at the store, way better than the other ones around the same price. Unfortunately, it's like 1/4 inch too big to fit in the original hole. So, I don't really feel like doing any modding.
Could you suggest a set that y'all own that fit normally?
|03-07-2010 06:09 PM|
okay the white connector hanging out of your speaker case in your picture has two wires coming out of the back of it. one of the wires is negative and the other is positive. i have no clue which is which try googleing it.
but after you find out you cut off the white connector and crimp the negative to the negative and the positive to the positive.
|03-07-2010 06:08 PM|
|03-07-2010 06:06 PM|
|Italia||nevermind, just answered my own question. Thanks for all the help! Will let you know how it went.|
|03-07-2010 06:01 PM|
OK, I found those. Applied them to the speakers, had a feeling something was missing..What I don't understand here is the last step between these new black wires and the plug that's hanging out of my speaker case.
Do I cut the white thing off and then..?
|03-07-2010 05:53 PM|
the new speakers should have come with 4 wires. 2 with bigger connectors and 2 with smaller connectors that go on the speakers. you can just splice those wires on to the factory one. or you get new connectors and crimp those on.
just make sure you dont mix up the positive and negative wires.
|03-07-2010 05:49 PM|
|Italia||Do the wires need something placed on the end or does the bare wire go around the connectors on the speaker?|
|03-07-2010 05:39 PM|
|thechink09||it looks like you could just cut off the white connector and just put on normal speaker connectors. you just have to find out which is positive and which is negative.|
|03-07-2010 05:34 PM|
Imageshack - spk2.jpg
Imageshack - spk1.jpg
In case the images don't show up for yall, they aren't for me, but the links seem to work.
|03-07-2010 05:14 PM|
Installing new 6 1/2" Rollbar Speakers
Hello, recently decided it was time to upgrade my roll bar speakers, and read through a few pages of the forums here about people that have done it. Unfortunately it seems everyone knows a little bit more than me about the subject when it comes to wiring.
I bought today Sony Xplod 6 1/2", but when I removed my factory speakers I realized it looks like this;
and my new speakers do not have such a simply plug-and-play feature to them. Instead, the Xplods have;
I have a sneaking suspicion that all I have to do is remove the white plug off the wires and they will be ready to wrap on to the new set. However, just a little hesitant to do it without re-assurance from someone who knows. My friend suggested that I buy one of the kits online that will plug in and then have an adapter for new speakers.
All help is appreciated, I'm anxious to get these in! Riding around without sound..